Budnick Converting ®
Application Temperature
What is the ideal tape application temperature?
The ideal adhesive tape application temperature is situation dependent. Environmental temperatures and the temperature of the tape and substrate you are applying the tape to can be different. The surface energy of the substrate, cleanliness, pressure used to apply the tape and dwell time before the tape is put into service can all have an effect on performance.
However, most tape manufacturers suggest applying tapes at temperatures above 40-50 degrees F. When the tape or substrate is cold the adhesive hardens and does not properly “wet out” or bond to the substrate. In severe applications, heat and pressure can be introduced to decrease dwell time and promote the bond strength.
Before applying tapes, always make sure that the surface is clean, dry and free of dust, oil or other contaminates. A mixture of 50/50 isopropyl alcohol and water is often suggested to clean surfaces.
This information was asertained from Gary Smith, Marketing Manager at Budnick Converting, Inc. To learn more about Budnick Converting visit www.BudnickConverting.com
The ideal adhesive tape application temperature is situation dependent. Environmental temperatures and the temperature of the tape and substrate you are applying the tape to can be different. The surface energy of the substrate, cleanliness, pressure used to apply the tape and dwell time before the tape is put into service can all have an effect on performance.
However, most tape manufacturers suggest applying tapes at temperatures above 40-50 degrees F. When the tape or substrate is cold the adhesive hardens and does not properly “wet out” or bond to the substrate. In severe applications, heat and pressure can be introduced to decrease dwell time and promote the bond strength.
Before applying tapes, always make sure that the surface is clean, dry and free of dust, oil or other contaminates. A mixture of 50/50 isopropyl alcohol and water is often suggested to clean surfaces.
This information was asertained from Gary Smith, Marketing Manager at Budnick Converting, Inc. To learn more about Budnick Converting visit www.BudnickConverting.com