Converting Ideas into Solutions ®

SearchProducts (301 Results)

Search by Application Details




Showing 301 of 301 results

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 125 Mils
Adhesion
  Compare Now

V744 is a 1/8" thick, 9#, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Norseal® V740 series has been specially formulated to provide superior performance with a reduced density foam.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 62.5 Mils
Adhesion
  Compare Now

V742 is a 1/16" thick, 9#, closed cell PVC, with an acrylic adhesive on one side. It is a multi-purpose, medium density foam that is ideal for light, air, and moisture seals. Norseal® V740 series.

Backing/Carrier Silicone Rubber
Adhesive Rubber
Thickness 13.4 Mils
Adhesion
  Compare Now

4563 is a 13.4 mil, smooth, siliconized treated tape. It is designed for wrapping rollers providing non-slip surface on machines for web control. Commonly known as "Printer's Friend".

Backing/Carrier Silicone Rubber
Adhesive Rubber
Thickness 24.4 Mils
Adhesion
  Compare Now

4863 is a 25 mil, dimpled, siliconized treated tape. It is designed for wrapping rollers providing non-slip surface on machines for web control. Commonly known as "Printers Friend".

Backing/Carrier Aluminum/Cloth
Adhesive Rubber
Thickness 15 Mils
Adhesion
  Compare Now

P12L is a woven cloth laminated with a dead soft aluminum foil and presented on a release liner. This tape is used for sound & vibration damping, sheet metal repair and aircraft stripping mask.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 250 Mils
Adhesion
  Compare Now

V748 is a 1/4" thick, 9#, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Norseal® V740 series has been specially formulated to provide superior performance with a reduced density foam.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 1.6 Mils
Adhesion
  Compare Now

LABLPRO 4350 is a 1.6 mil (0.041mm, 23 micron) polypropylene label protetion and lamination tape featuring a water-based acrylic adhesive system.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 2 Mils
Adhesion
  Compare Now

LABLPRO 4360 is a 2 mil polypropylene film coated in a solvent-based non-yellowing acrylic adhesive. This tape is used for prescription/label protection and lamination. It is UV Resistant.

Backing/Carrier PET - Polyester
Adhesive Acrylic
Thickness 10 Mils
Adhesion
  Compare Now

GLOW 4310 is a flexible polyester laminated photoluminescent film coated with a permanent acrylic pressure-sensitive adhesive and backed with a 5 mil poly coated paper release liner. The photoluminescent pigments absorb and store energy from normal ambient light. In sudden darkness the tape is immediately visible.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 5.2 Mils
Adhesion
  Compare Now

PVC 4700 is a 5.2mil matte surface soft PVC coated in a synthetic rubber adhesive. This superior quality product has a long shelf life and write-on capabilities. It provides a very effective vapor and moisture barrier.

Backing/Carrier
Adhesive Rubber
Thickness 31.25 Mils
Adhesion
  Compare Now

MAGNET 5200 is a 30Mil indoor adhesive magnetic tape consisting of a 3.3 mil double coated polyester tape with an aggressive, general purpuse, rubber based adhesive laminated to a multipole one face flexible magnet and supplied on a semi-bleached kraft liner.

Backing/Carrier
Adhesive Acrylic
Thickness 31.25 Mils
Adhesion
  Compare Now

MAGNET 5210 is a 30Mil indoor/outdoor adhesive magnetic tape consisting of a 4.5 mil double coated polyester tape with a high performance acrylic based adhesive system laminated to a multipole one face flexible magnet and supplied on a semi-bleached kraft liner.

Backing/Carrier
Adhesive Acrylic
Thickness 31.25 Mils
Adhesion oz/in
  Compare Now

This 32mil, 60 Grit silicon carbide safety tape offers high traction, anti-slip, waterproof surface coated with an aggressive acrylic adhesive. For use indoors and outdoors on walkways, ramps, stairways, in machine shops, work areas, and more. Complies with OSHA 1910.263

Backing/Carrier
Adhesive Acrylic
Thickness 31.25 Mils
Adhesion oz/in
  Compare Now

This 32mil, 60 Grit aluminum oxide safety tape offers high traction, anti-slip, waterproof surface coated with an aggressive acrylic adhesive. For use indoors and outdoors on walkways, ramps, stairways, in machine shops, work areas, and more. Complies with OSHA 1910.263

Backing/Carrier
Adhesive Rubber
Thickness 93 Mils
Adhesion
  Compare Now

SJ3526N is a nylon 6 black hook with a synthetic rubber adhesive that is suited for attachment to low surface energy substrates. It offers closure alternatives to zippers, screws, snaps, hooks, bolts and more. **Mate with SJ3527N Loop**

Backing/Carrier
Adhesive Rubber
Thickness 125 Mils
Adhesion
  Compare Now

SJ3527N is a nylon 6,6 black loop with a synthetic rubber adhesive that is suited for attachment to low surface energy substrates. It offers closure alternatives to zippers, screws, snaps, hooks, bolts and more. *Mate with SJ3526N Hook**

Backing/Carrier
Adhesive Rubber
Thickness 62 Mils
Adhesion
  Compare Now

MAGNET 5240 is a 60 mil thick indoor single faced self-adhesive magnetic tape. MAGNET 5240 is made for general purpose bonding applications to foams, felts, cloths, primed wood, paper, metal, plastics and most low or un-plasticized substrates. It has a good balance of economy and performance.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 250 Mils
Adhesion
  Compare Now

65SC.25 is a 1/4" thick, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Meets UL 94 HBF.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 500 Mils
Adhesion
  Compare Now

65SC.50 is a 1/2" thick, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Meets UL 94HBF.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 65 Mils
Adhesion
  Compare Now

3MT Dual Lock Reclosable Fastener is a low surface energy adhesive on the back of a clear polypropylene reclosable fastener. Low profile. .098 inch engaged thickness. Closure life 100 - Trial Bag.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 140 Mils
Adhesion oz/in
  Compare Now

3MT Dual LockT Reclosable Fastener TB3560 is a clear acrylic adhesive on the back of a clear polypropylene reclosable fastener. 250 stems per square inch. .23 inch engaged thickness. Closure life 1,000.

Backing/Carrier
Adhesive Acrylic
Thickness 42 Mils
Adhesion oz/in
  Compare Now

3MT Gripping Material TB400 is a black, acrylic, pressure sensitive adhesive PSA backed gripping material. High-friction surface with an adhesive backing to be easily applied to a variety of surfaces or materials.

Backing/Carrier
Adhesive Acrylic
Thickness 42 Mils
Adhesion oz/in
  Compare Now

3MT Gripping Material TB631 is a Gray, acrylic pressure sensitive adhesive PSA backed gripping material. Very soft high-friction surface with an adhesive backing to be easily applied to a variety of surfaces or materials.

Backing/Carrier
Adhesive Acrylic
Thickness 42 Mils
Adhesion oz/in
  Compare Now

3MT Gripping Material TB631 is a Gray, acrylic pressure sensitive adhesive PSA backed gripping material. Very soft high-friction surface with an adhesive backing to be easily applied to a variety of surfaces or materials.

Backing/Carrier
Adhesive Acrylic
Thickness 42 Mils
Adhesion oz/in
  Compare Now

3MT Gripping Material TB641 is a black, acrylic pressure sensitive adhesive PSA backed gripping mateial. Soft medium-friction surface with an adhesive backing to be easily applied to a cariety of surfaces or materials.

Backing/Carrier
Adhesive Acrylic
Thickness 42 Mils
Adhesion oz/in
  Compare Now

3MT Gripping Material TB641 is a black, acrylic pressure sensitive adhesive PSA backed gripping mateial. Soft medium-friction surface with an adhesive backing to be easily applied to a cariety of surfaces or materials.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness
Adhesion oz/in
  Compare Now

3MT Dual Lock™ Reclosable Fastener TB3550 is a general purpose, acrylic adhesive on the back of a black, polypropylene reclosable fastener. 250 stems per square inch. .23 inch engaged thickness. Closure life 1,000.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 5.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PET - Polyester
Adhesive Acrylic
Thickness 10 Mils
Adhesion
  Compare Now

GLOW 4305 is a flexible polyester laminated photoluminescent film coated with a permanent acrylic pressure-sensitive adhesive and backed with a 5 mil poly coated paper release liner. The photoluminescent pigments absorb and store energy from normal ambient light. In sudden darkness the tape is immediately visible.

Backing/Carrier
Adhesive
Thickness 31.25 Mils
Adhesion oz/in
  Compare Now

MAGNET 5220 is a 30Mil (0.762mm) writeable, matte white vinyl magnet with a porous, writeable, screen-printable matte white vinyl surface. This product has no adhesive. It is writeable with either permanent marker or with a water soluble marker for non-permanent applications.

Backing/Carrier
Adhesive
Thickness 31.25 Mils
Adhesion oz/in
  Compare Now

MAGNET 5230 is a 1/32" non-adhesive write-on/wipe-off white vinyl. The 30mil magnet is faced with a non-porous, smooth, shiny white vinyl surface and is writeable with a dry erase marker with easy wipe-off.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 140 Mils
Adhesion oz/in
  Compare Now

3MT Dual Lock™ Reclosable Fastener 3550 is a general purpose, acrylic adhesive on the back of a black, polypropylene reclosable fastener. 250 stems per square inch. .23 inch engaged thickness. Closure life 1,000.

Backing/Carrier
Adhesive Acrylic
Thickness 62 Mils
Adhesion
  Compare Now

MAGNET 5250 is a single faced self-adhesive magnetic tape that is comprised of a Multipole Flexible Magnet mounted on a thin polyester film, coated on both sides with an aggressive rubber based pressure sensitive adhesive.

Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now

Walk safely with this 1" non-skid safely strip. Ideal to prevent slipping when walking in hasardous places. Perfect for steps, ladders, swimming pools, skate boards, and more.

Backing/Carrier
Adhesive Acrylic
Thickness 31.25 Mils
Adhesion oz/in
  Compare Now

This 32mil, 60 Grit silicon carbide safety tape offers high traction, anti-slip, waterproof surface coated with an aggressive acrylic adhesive. For use indoors and outdoors on walkways, ramps, stairways, in machine shops, work areas, and more. Complies with OSHA 1910.263

Backing/Carrier
Adhesive Acrylic
Thickness 31.25 Mils
Adhesion oz/in
  Compare Now

This 32mil, 60 Grit silicon carbide safety tape offers high traction, anti-slip, waterproof surface coated with an aggressive acrylic adhesive. For use indoors and outdoors on walkways, ramps, stairways, in machine shops, work areas, and more. Complies with OSHA 1910.263

Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now

Walk safely with this 2" non-skid safely strip. Ideal to prevent slipping when walking in hasardous places. Perfect for steps, ladders, swimming pools, skate boards, and more.

Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now

Walk safely with this 4" non-skid safely strip. Ideal to prevent slipping when walking in hasardous places. Perfect for steps, ladders, swimming pools, skate boards, and more.

Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now

Walk safely on this high traction, gritty surfaced tape, ideal for use on steps, ladders, skate boards, and more to help prevent slipping.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 5.9 Mils
Adhesion
  Compare Now

60760 is a soft PVC with a clean removal rubber adhesive system with durable PVC backing that provides excellent impact and scuff resistance.

Backing/Carrier
Adhesive
Thickness 3 Mils
Adhesion oz/in
  Compare Now

This pipe thread seal tape is 100% Virgine PTFE with a white film in labeled plastic spool/box. This thread seal tape lubricates joints - making them easy to assemeble for a leak proof seal.

Backing/Carrier
Adhesive
Thickness 4 Mils
Adhesion oz/in
  Compare Now

***Product has been discontinued by the manufacturer and replaced with PTFE 5411***This pipe thread seal tape is 100% Virgin PTFE, white film in a labeled plastic spool/box. This seal tape lubricates joints, making them easy to assemble for a leak proof seal.

Backing/Carrier PP - Polypropylene
Adhesive Rubber
Thickness
Adhesion oz/in
  Compare Now

A general purpose, acrylic adhesive on the back of a black, polypropylene reclosable fastener. 400/170 stems per square inch. 0.23 inch engaged thickness. Closure life 1,000

Backing/Carrier
Adhesive Acrylic
Thickness 42 Mils
Adhesion oz/in
  Compare Now

3MT Gripping Material TB400 is a black, acrylic, pressure sensitive adhesive PSA backed gripping material. High-friction surface with an adhesive backing to be easily applied to a variety of surfaces or materials.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 65 Mils
Adhesion
  Compare Now

3MT Dual Lock Reclosable Fastener is a low surface energy adhesive on the back of a clear polypropylene reclosable fastener. Low profile. .098 inch engaged thickness. Closure life 100 - Trial Bag.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 140 Mils
Adhesion oz/in
  Compare Now

A clear acrylic adhesive on the back of a clear polypropylene reclosable fastener. 400/170 stems per square inch. 0.23 inch engaged thickness. Closure life 1,000.

Backing/Carrier PP - Polypropylene
Adhesive Rubber
Thickness 140 Mils
Adhesion oz/in
  Compare Now

A rubber based adhesive on the back of a black, polypropylene reclosable fastener. 250 stems per square inch. .23 inch engaged thickness. Closure life 1,000.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 140 Mils
Adhesion oz/in
  Compare Now

3MT Dual LockT Reclosable Fastener TB3550 is a general purpose, acrylic adhesive on the back of a black, polypropylene reclosable fastener. 250 stems per square inch. .23 inch engaged thickness. Closure life 1,000.

Backing/Carrier PET - Polyester
Adhesive
Thickness 7 Mils
Adhesion oz/in
  Compare Now

3M™ Durable PET Film, RMNC7-HC, is a high clarity, low haze 7 mil clear polyester film with an anti-static coating. To prevent scratching during processing and handling, it may also be available with surface protection film. Its dimensional stability and durability make it ideal for die cutting and other fabrication techniques. The anti-static coating makes it easier to process and handle.

Backing/Carrier PET - Polyester
Adhesive
Thickness 14 Mils
Adhesion oz/in
  Compare Now

3M™ 9960FS anti-fog diagnostic hydrophilic film consists of a clear polyester film on a roll coated on two sides with a 3M hydrophilic technology. The hydrophilic treatment is the same on both sides of the film. The product is designed for use in health care medical devices such as test strip and lab-on-a-chip applications.

Backing/Carrier
Adhesive
Thickness 159 Mils
Adhesion oz/in
  Compare Now

Standard Grade Un-backed BudHook & BudLoop is a general-purpose fastener suitable for a wide variety of applications. This product is 100% nylon and exhibits a high peel & shear strength along with an excellent life cycle. This fastener is also available with an FR coating that meets FAA & FMV specifications and conforms to Mil-Spec AA-55126A.

Backing/Carrier UPVC - Unplasticized Polyvinylchloride
Adhesive Rubber
Thickness 2.4 Mils
Adhesion
  Compare Now

A 2.4 mil. ruby red translucent tape which is optically transparent and photographically opaque.

Backing/Carrier PTFE - Hi Modulous
Adhesive Silicone
Thickness 6.5 Mils
Adhesion
  Compare Now

2255-5 is 6.5 mil, high modulous, PTFE coated film tape. It is primarily used for phase insulation, bundling end turns, anchoring breakouts and protecting air-frame wire harnesses.

Backing/Carrier PTFE - Extruded
Adhesive Silicone
Thickness 4 Mils
Adhesion
  Compare Now

923S is a 4 mil total thickness, specially oriented, PTFE film tape. It's release properties are ideally suited for roll wrapping, lining chutes, vibration gaskets & cloth lamination.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 4.5 Mils
Adhesion
  Compare Now

2045-3 is a 4.5 mil, skived PTFE film coated with a high temperature, pressure sensitive silicone adhesive. It is primarily used for electrical insulation.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 12.5 Mils
Adhesion
  Compare Now

TH is a 12.5 mil, PTFE film with silicone pressure sensitive adhesive. It is highly conformable and offers excellent physical and electrical properties.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 8 Mils
Adhesion
  Compare Now

SG16-05 is a 6 mil. fiberglass fabric impregnated with a PTFE dispersion and coated with a high temperature, pressure sensitive, silicone adhesive (high performance grade).

Backing/Carrier EPDM - Ethylene Propylene Diene Monomer
Adhesive Rubber
Thickness
Adhesion
  Compare Now

Nitto EE1010 (EPT Sealer) is a pressure-closed-cell foam joint-filling material used to fill gaps found in a variety of structures. EE 1010 can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material.

Backing/Carrier Aluminum
Adhesive Rubber
Thickness 45 Mils
Adhesion
  Compare Now

360-45 is a 45mil, aluminum foil, all weather duct tape, primarily used for instant water tight bonds.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 12.5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 7.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier Aluminum
Adhesive
Thickness 15 Mils
Adhesion
  Compare Now

This sound damping product consists of a room temperature pressure-sensitive viscoelastic polymer on a dead soft aluminum foil, designed to reduce noise from resonance induced vibrations in sinks, panels. support members.and other structure born noise.

Backing/Carrier Aluminum
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

P11 is a 5 mil, dead soft aluminum foil tape primarily used for sealing, heat shielding and as a protective cover for critical parts.

Backing/Carrier Polyolefin
Adhesive Rubber
Thickness 7 Mils
Adhesion
  Compare Now

2300-5R is a 7 mil, polyolefin (UHMW) film coated used in bottling plant conveyors.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 35.3 Mils
Adhesion
  Compare Now

9132 ia a 31.25 mil thick, double coated, polyethylene foam used for mounting, sealing, gasketing and sound and vibration damping applications.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 62.5 Mils
Adhesion
  Compare Now

9116 is a 62.5 mil, double coated polyethylene foam designed or mounting, sealing, sound and vibration damping.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 10.3 Mils
Adhesion
  Compare Now

403-5 is a 10.3 mil UHMW polyethylene film with an elastomer rubber based adhesive is an extremely rugged film that is highly abrasion resistant.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 8.3 Mils
Adhesion
  Compare Now

403- is a 8.3 mil, UHMW polyethylene film backing used primarily in mechanical applications such as chute liners, wear pads and guide rails.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 15.3 Mils
Adhesion
  Compare Now

403-10 is a 10 mil ultra high molecular weight polyethylene used primarily in mechanical applications such as chute liners, wear pads and guide rails.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 6.5 Mils
Adhesion
  Compare Now

204-5HD is a 6.5 mil, skived & tensilized PTFE film used primarily in electrical applications such as coil wraps and separators, transformer, slot liner and harness wrapping.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

204-2 is a 3.5 mil, skived PTFE film used primarily in electrical applications such as coil wraps and separators, transformer, slot liner and harness wrapping.

Backing/Carrier FEP - Fluorinated Ethylenepropylene
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

704-2 is a 3.5 mil, FEP (Teflon r) film used primarily in electrical applications.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 5.3 Mils
Adhesion
  Compare Now

3M5451 is a woven glass cloth impregnated with PTFE and silicone adhesive which provides a high temperature release surface for protection and insulation.

Backing/Carrier PE - Polyethylene
Adhesive Silicone
Thickness 11 Mils
Adhesion
  Compare Now

492P is a 5 mil porous film produced from Ultra High Molecular Weight (UHMW) polyethylene, application areas would include filtration &diagnostics.

Backing/Carrier PE - Polyethylene
Adhesive
Thickness 6.5 Mils
Adhesion oz/in
  Compare Now

970 is a laminate of 5 mil, UHMW polyethylene film and 50 mil polyethylene foam used in the cap and closure market.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 11.8 Mils
Adhesion
  Compare Now

750-10 is a 11.8 mil, Ultra High Molecular Weight (UHMW) polyethylene used primarily for automotive applications such as anti-squeak and sound deadening.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 3.5 Mils
Adhesion
  Compare Now

215-2HD is a skived and tensilized PTFE film used primarily in electrical applications.

Backing/Carrier PTFE - Skived
Adhesive
Thickness 2 Mils
Adhesion oz/in
  Compare Now

213 is a 2 mil, film skived from virgin PTFE, that has been etched on one side bonding to elastomers to produce laminated diaphragms.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 4.5 Mils
Adhesion
  Compare Now

215-3 is a 4.5 mil skived PTFE film used primarily in electrial applications

Backing/Carrier PTFE - Skived
Adhesive
Thickness
Adhesion oz/in
  Compare Now

211 is a 2 mil, film, skived from virgin PTFE, that has been etched on one side for bonding to elastomers to produce laminated diaphragms.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

101T is a 3.5 mil, skived PTFE film and coated with a high temperature silicone adhesive. They are UL recognized.

Backing/Carrier Silicone Rubber/Glass Cloth
Adhesive Silicone
Thickness 7 Mils
Adhesion
  Compare Now

134-5 is a 7 mil, PTFE impregnated glass fabric used in mechanical applications such as heat sealing bars, conveyor belt coverings and gaskets/seals.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

244-2HD is a 3.5 mil, skived and tensilized PTFE film used in electrical applications.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 6.5 Mils
Adhesion
  Compare Now

204-5 is a 6.5 mil, skived PTFE film used primarily in electrical applications such as coil wraps and separators, transformer, slot liner and harness wrapping.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 1.5 Mils
Adhesion oz/in
  Compare Now

413DL is a black double coated flexographic mounting tape with a firm rubber adhesive on each side of a vinyl carrier. This tape offers lower adhesion, higher temperature and solvent resistance, and helps minimize pin holing on solids. Double Linered.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 2 Mils
Adhesion
  Compare Now

3M 412DL is a 2 mil, gray. double coated vinyl used for mounting photopolymer and rubber plates in solid printing.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 2 Mils
Adhesion
  Compare Now

3M 414DL is a 2 mil, black, double coated vinyl used for mounting photopolymer and rubber plates in solid printing.

Backing/Carrier PTFE - Skived
Adhesive
Thickness 2 Mils
Adhesion oz/in
  Compare Now

212 is a 2 mi, skived virgin PTFE, that has been etched on one side used in the production of PTFE tapes.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 4.5 Mils
Adhesion
  Compare Now

204-3HD is a 4.5 mil, skived & tensilized PTFE film used primarily in electrical applications such as coil wraps and separators, transformer, slot liner and harness wrapping.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

204-2HD is a 3.5 mil, skived & tensilized PTFE film used primarily in electrical applications such as coil wraps and separators, transformer, slot liner and harness wrapping.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 21.8 Mils
Adhesion
  Compare Now

423-20 is a 20 mil, Ultra High Molecular Weight (UHMW) polyethylene film backing whose mechanical applications include chute liners, wear pads & guide rails.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 7 Mils
Adhesion
  Compare Now

423-5 is a 7 mil, UHMW polyethylene film used in mechanical applications that include chute liners, wear pads & guide rails.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 11.8 Mils
Adhesion
  Compare Now

423-10 is a 11.8 mil, UHMW polyethylene film used for chute liners, wear pad & guide rails in the automotive industry.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness
Adhesion oz/in
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE - Skived
Adhesive
Thickness 1.5 Mils
Adhesion oz/in
  Compare Now

102 is a 1.5 mil, skived PTFE film backing compounded with carbon to produce a conductive film. It can be surface treated to enhance bonding to other substrates.

Backing/Carrier PET - Polyester
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

NT-8512-2 is a 3.5 mil, polyester film used for splicing photographic film to leader card during film processing.

Backing/Carrier PET - Polyester
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

NT-2012-2 is a 3.5 mil, polyester film used for splicing photographic film to leader card during film processing.

Backing/Carrier PE - Polyethylene
Adhesive
Thickness
Adhesion oz/in
  Compare Now

402 is a 3 mil, skived, carbon filled UHMW (Ultrahigh Molecular Weight Polyethylene) Film. The carbon type and level achieve conductivity sufficient for static dissipation applications.

Backing/Carrier PTFE - Skived
Adhesive
Thickness 3 Mils
Adhesion oz/in
  Compare Now

103 is a skived PTFE used as a static dissipative layer within "high static" paint hoses.

Backing/Carrier PTFE - Skived
Adhesive Rubber
Thickness 4 Mils
Adhesion
  Compare Now

242-2 is a 2 mil, silicone Free PTFE pressure sensitive tape made from a skived and tensilized PTFE film specifically designed for the Aerospace Composite Industry.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 8 Mils
Adhesion
  Compare Now

245-5 is a 5 mil, skived PTFE film used primarily for down-hole cable splicing which requires good adhesive strength at elevated temperatures.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 20.3 Mils
Adhesion
  Compare Now

403-15 is a 15 mil, Ultra High Molecular Weight Polyethylene used in applications such as chute liners, wear pads and guide rails.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 25.3 Mils
Adhesion
  Compare Now

403-20 is a 20mil, Ultra High Molecular Weight Polyethylene (UHMW) film used primarily in mechanical applications such as chute liners, wear pads and guide rails.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

423-3 is a 3 mil, UHMW polyethylene used in automotive and mechanical applications.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 14 Mils
Adhesion
  Compare Now

495 is a 14 mil, foil/glass laminate used as masking tape in plasma flame spray application.

Backing/Carrier PTFE - Skived
Adhesive
Thickness
Adhesion
  Compare Now

950 is a laminate of 5 mil, PTFE film and a 50 mil polyethylene foam used as a lining for the cap and closure market.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 3.5 Mils
Adhesion
  Compare Now

244-2JSF 3.5 mil, skived and tensilized PTFE film used in various aerospace release applications within composite constructions.

Backing/Carrier PTFE - Extruded
Adhesive Rubber
Thickness 55 Mils
Adhesion
  Compare Now

951-55 is a laminate of 5 mil, PTFE film and 50 mil 14B rubber used as lining for cap and closures.

Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now

Safety Walk is a durable, oil-resistant, all-vinyl floor mat having an open, continuously patterned surface.

Backing/Carrier PET - Polyester
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

NT-5521-2 is a 3.5 mil, polyester film used for splicing photographic film to leader card during film processing.

Backing/Carrier PTFE - Extruded
Adhesive Silicone
Thickness 4.3 Mils
Adhesion
  Compare Now

662 is a 4.3 mil, highly tensilized PTFE used for flat die extrusion of PE coatings.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 125 Mils
Adhesion
  Compare Now

9208 is a 125 mil, double coated polyethylene foam tape designed for mounting, sealing & gasketing applications.

Backing/Carrier Polyolefin
Adhesive Rubber
Thickness 12 Mils
Adhesion
  Compare Now

2300-10R is a 12 mil, polyolefin (UHMW) film coated with a rubber adhesive.

Backing/Carrier PTFE - Hi Modulous
Adhesive Acrylic
Thickness 3.5 Mils
Adhesion
  Compare Now

2253-2 is a 3.5 mil, high modulous PTFE tape with acrylic adhesive.

Backing/Carrier PTFE - Hi Modulous
Adhesive Silicone
Thickness 7.5 Mils
Adhesion
  Compare Now

2255-6 is a 7.5 mil, high modulous PTFE tape with acrylic adhesive.

Backing/Carrier FEP - Fluorinated Ethylenepropylene
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

706-2 is a 3.5 mil FEP teflon used in electrical applications

Backing/Carrier BOPP - Biaxially Oriented Polypropylene
Adhesive
Thickness 1.6 Mils
Adhesion
  Compare Now

AP015 is a 1.6 mil, BOPP film with an acrylic adhesive that offers high resistance to UV radiation.

Backing/Carrier PET - Polyester
Adhesive Acrylic
Thickness 4.5 Mils
Adhesion
  Compare Now

4576 is a highly elastic single sided adhesive tape 4.5 mils thick made of PET/cellulose non-woven fabric.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 6.5 Mils
Adhesion
  Compare Now

215-5 is a 5 mil PTFE coated with a high temperature acrylic adhesive.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 6 Mils
Adhesion
  Compare Now

D/W 204-3 is a 6 mil, skived PTFE film used in electrical applications such as coil wraps.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 7.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 8.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE - Oriented
Adhesive Silicone
Thickness 4.3 Mils
Adhesion
  Compare Now

663 is a 4.3 mil, highly tensilized PTFE film coated with a high temperature silicone adhesive.

Backing/Carrier Fiberglass
Adhesive
Thickness 3 Mils
Adhesion oz/in
  Compare Now

132-3 is a 3 mil PTFE impregnated glass fabric. The PTFE provides a smooth, anti-stick surface, while the glass fabric provides strength and dimensional stability.

Backing/Carrier Fiberglass
Adhesive
Thickness 6 Mils
Adhesion oz/in
  Compare Now

132-6 is a 6 mil PTFE impregnated glass fabric. The PTFE provides a smooth, anti-stick surface, while the glass fabric provides strength and dimensional stability.

Backing/Carrier Fiberglass
Adhesive
Thickness 10 Mils
Adhesion oz/in
  Compare Now

132-10 is a 10 mil PTFE impregnated glass fabric. The PTFE provides a smooth, anti-stick surface, while the glass fabric provides strength and dimensional stability.

Backing/Carrier
Adhesive Rubber
Thickness 150 Mils
Adhesion oz/in
  Compare Now

3M™ High Tack Loop Fastener Tape SJ30L is a nylon loop tape with a rubber adhesive, white polyethylene film liner and an engaged thickness between 100 mil to 160 mil.

Backing/Carrier
Adhesive Rubber
Thickness 150 Mils
Adhesion oz/in
  Compare Now

3M™ High Tack Hook Fastener Tape SJ30H is a nylon hook tape with a rubber adhesive, white polyethylene film liner and an engaged thickness between 100 mil to 160 mil.

Backing/Carrier Polyolefin
Adhesive Acrylic
Thickness 3.9 Mils
Adhesion
  Compare Now

VM2229P is a 100% chlorine and phthalate free film. It is 3.9mil gloss white, topcoated modified polyolefin film designed for digital printing. The product is coated on one side with a permanent, clear, acrylic pressure sensitive adhesive and supplied with a 74# white Kraft liner.

Backing/Carrier PET - Polyester
Adhesive Acrylic
Thickness 2 Mils
Adhesion
  Compare Now

VM3209R is a 100% chlorine and phthalate free film. It is a 2mil gloss, ultra clear, topcoated and scratch resistant polyester film designed for UV and digital printing.

Backing/Carrier PP - Polypropylene
Adhesive Acrylic
Thickness 64.5 Mils
Adhesion oz/in
  Compare Now

3MT Dual LockT Low Profile Reclosable Fastener SJ4570 can replace conventional fasteners, such as screws, clips, rivets, snaps, hook and loop and bolts in many applications where access or repositioning is needed.

Backing/Carrier
Adhesive Rubber
Thickness 400 Mils
Adhesion oz/in
  Compare Now

Pressure sensitive rubber adhesive backed polyurethane protective bumper. Good energy absorption on impact. Hemispherical; Standard colors are white, brown, black, and grey

Backing/Carrier
Adhesive Rubber
Thickness
Adhesion
  Compare Now

1727 is a weather/wear resistant non-skid tape designed to assist in slippery areas. It consists of a 4 mil PVC film coated in an acrylic adhesive.

Backing/Carrier
Adhesive Acrylic
Thickness 23 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 220 is a clear 23 mil, fine textured, slip-resistant surface with a pressure-sensitive adhesive backing providing enhanced safety and comfort in light- and barefoot-traffic areas. The special acrylic adhesive coating is formulated specifically for wet areas such as showers, tubs, surfboards, and pools.

Backing/Carrier
Adhesive Acrylic
Thickness 23 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 280 is a white 23 mil, fine textured, slip-resistant surface with a pressure-sensitive adhesive backing providing enhanced safety and comfort in light- and barefoot-traffic areas. The special acrylic adhesive coating is formulated specifically for wet areas such as showers, tubs, surfboards, and pools.

Backing/Carrier
Adhesive Acrylic
Thickness 23 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 7705 is a white 23 mil, fine textured, slip-resistant strip with a pressure-sensitive adhesive backing providing enhanced safety and comfort in light- and barefoot-traffic areas. 7705 is available in .75" x 17" strips designed specifically for tub and shower floors.

Backing/Carrier
Adhesive Acrylic
Thickness 45 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 310 is a black 45 mil, soft textured, non-mineral, medium resilient surface bonded to a pressure-sensitive adhesive backed plastic film. It is designed for barefoot or shoe traffic areas. The textured resilient high friction surface and durable adhesive provide long-lasting performance. Available in treads, tapes, or custom converted shapes and sizes.

Backing/Carrier
Adhesive Acrylic
Thickness 45 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 310 is a gray 45 mil, soft textured, non-mineral, medium resilient surface bonded to a pressure-sensitive adhesive backed plastic film. It is designed for barefoot or shoe traffic areas. The textured resilient high friction surface and durable adhesive provide long-lasting performance.

Backing/Carrier
Adhesive Acrylic
Thickness 36 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 510 is a gray 36 mil, high-friction, slip-resistant material that has a special pressure-sensitive adhesive backed aluminum film that conforms around corners and adheres to irregular surfaces. It is designed specifically for irregular surfaces such as diamond plating or flat surfaces with rivets or screw heads.

Backing/Carrier
Adhesive Acrylic
Thickness 36 Mils
Adhesion oz/in
  Compare Now

Safety WalkT 530 is a yellow 36 mil, high-friction, slip-resistant material that has a special pressure-sensitive adhesive backed aluminum film that conforms around corners and adheres to irregular surfaces. It is designed specifically for irregular surfaces such as diamond plating or flat surfaces with rivets or screw heads. Safety yellow color for high visibility and easy identification of hazard areas.

Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier
Adhesive
Thickness
Adhesion oz/in
  Compare Now
Backing/Carrier BOPP - Biaxially Oriented Polypropylene
Adhesive Acrylic
Thickness 2.2 Mils
Adhesion
  Compare Now

PP803 is a 2.2 mil, premium plus, label protection & packaging tape. It is used in label protection, carton sealing and laminating.

Backing/Carrier BOPP - Biaxially Oriented Polypropylene
Adhesive Acrylic
Thickness 1.8 Mils
Adhesion
  Compare Now

PP807 is a 1.8 mil, premium grade, general purpose & label protection tape. It is used to protect labels, instructions and lamination.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 60.5 Mils
Adhesion
  Compare Now

52015 is a 60.5 mil, double-coated foam platemounting tape for high quality flexographic printing.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 15 Mils
Adhesion
  Compare Now

52017 is a 15 mil double coated foam tape used for mounting photopolymer plates in narrow and web film and paper flexoprinting.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 4.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 6.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surface.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 7.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 11.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 15.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 4.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 6.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 6.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 11.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 15.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 4.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (Premium Grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 6.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (premium grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 7.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (premium grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 11.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (premium grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 15.7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (premium grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 8 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 12.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 16.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 5.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 7.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 8.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 12.5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 16.5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 5.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 8.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 12.5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces (high performance grade).

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 3.5 Mils
Adhesion
  Compare Now

2042-2 is a 3.5 mil tape with 2 mil skived teflon and 1.5 mil pressure sensitive acrylic adhesive. It is used to keep ink and/or adhesive from building up on press rollers during processing.

Backing/Carrier PU - Polyurethane
Adhesive Acrylic
Thickness 16 Mils
Adhesion
  Compare Now

LS7116 is a 16 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS7016 has no adhesive.

Backing/Carrier PU - Polyurethane
Adhesive Acrylic
Thickness 30 Mils
Adhesion
  Compare Now

LS7130 is a 30 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products.

Backing/Carrier PU - Polyurethane
Adhesive Acrylic
Thickness 94 Mils
Adhesion
  Compare Now

LS7194 is a 94 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS7094 has no adhesive.

Backing/Carrier PU - Polyurethane
Adhesive Acrylic
Thickness 125 Mils
Adhesion
  Compare Now

LS71125 is a 125 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS70125 has no adhesive.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

5180 is a 3.5 mil, general purpose PTFE skived film tape. It is primarily used for wrapping rollers, sealing and masking.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 6.5 Mils
Adhesion
  Compare Now

5181 is a 6.5 mil, general purpose PTFE skived film tape. It is primariy used for wrapping rollers, sealing and masking.

Backing/Carrier PET - Polyester
Adhesive Acrylic
Thickness 4.8 Mils
Adhesion
  Compare Now

7743FL is a 4 mil, premium overlaminate for extreme environmental conditions.

Backing/Carrier Aluminum
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

T603 is a 3.5 mil, aluminum substrate coated with PTFE with a pressure sensitive adhesive on one side.

Backing/Carrier Aluminum
Adhesive Silicone
Thickness 5 Mils
Adhesion
  Compare Now

T903 is a 3.5 mil, aluminum substrate coated with PTFE with a pressure sensitive adhesive on one side.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 8 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 7 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 8 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 12.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 5.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 8 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Acrylic
Thickness 12.3 Mils
Adhesion
  Compare Now

Fiberglass fabric impregnated with pure polytetrafluoroethylene (PTFE) coated with adhesive provides superior non-stick surfaces.

Backing/Carrier FEP - Fluorinated Ethylenepropylene
Adhesive Silicone
Thickness 3.5 Mils
Adhesion
  Compare Now

2355-2 is a 3.5 mil, FEP PTFE film coated with a high-temperature, pressure sensitive silicone adhesive.

Backing/Carrier
Adhesive Acrylic
Thickness 4 Mils
Adhesion
  Compare Now

394 is a 4mil, non-woven synthetic backing tape, primarily used for foam-in-place insulation processes in appliance and other industries.

Backing/Carrier Fluoropolymer
Adhesive Acrylic
Thickness
Adhesion oz/in
  Compare Now

838 is a Tedlarr PVF tape with an acrylic adhesive developed for many long term weather resistant and protecting applications.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 13 Mils
Adhesion
  Compare Now

204-10 is a skived PTFE film used in electrical applications.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 11.5 Mils
Adhesion
  Compare Now

215-10 is a 11.5 mil, skived PTFE film that is coated with a "high performance" acrylic adhesive. It is used in electrical applications.

Backing/Carrier PTFE Coated Fiberglass
Adhesive Silicone
Thickness 8.3 Mils
Adhesion
  Compare Now

3M5453 is a woven glass cloth impregnated with PTFE and a silicone adhesive which provides a high temperature release surface for protection and insulation.

Backing/Carrier PTFE - Skived
Adhesive Silicone
Thickness 4 Mils
Adhesion
  Compare Now

FST is a 4 mil, highly tensilized, skived PTFE film used almost exclusively for roll protection in high speed, high temperature flat die extrusion of polyethylene coatings and laminations.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 4.8 Mils
Adhesion
  Compare Now

750-3 is a 4.8 mil, Ultra High Molecular Weight (UHMW) polyethylene used primarily for automotive applications such as anti-squeak and sound deadening.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 6.8 Mils
Adhesion
  Compare Now

750-5 is a 6.8 mil, Ultra High Molecular Weight (UHMW) polyethylene used primarily for automotive applications such as anti-squeak and sound deadening.

Backing/Carrier Reinforced Polyethylene
Adhesive Acrylic
Thickness 20 Mils
Adhesion
  Compare Now

52021 is a 20 mil, polyethylene foam with a film reinforcement for mounting photopolymer plates in wide-web film and paper flexoprinting.

Backing/Carrier Reinforced Polyethylene
Adhesive Acrylic
Thickness 20 Mils
Adhesion
  Compare Now

52020 is a 20 mil, double coated PE foam for mounting photopolymer plates in wide-web film and paper flexoprinting.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 1.5 Mils
Adhesion
  Compare Now

411 is a 14.9mil gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 9.8 Mils
Adhesion
  Compare Now

447DL is a 9.8mil gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 40 Mils
Adhesion
  Compare Now

3M 1640 is a 40mil non-compressible vinyl carrier coated on one side with a pressure sensitive acrylic adhesive designed for building up print cylinder diameter.

Backing/Carrier Uncoated Cloth
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

3294 is a 5 mil rayon which is a non-woven, synthetic backing with a strip-coated low tack for various venting applications requiring high outgassing rates.

Backing/Carrier Polyolefin
Adhesive Acrylic
Thickness 6.5 Mils
Adhesion
  Compare Now

9324 is a 6.5mil black UHMW-PE (ultra-high molecular weight polyethylene) film tape.

Backing/Carrier Polyolefin
Adhesive Acrylic
Thickness 5 Mils
Adhesion
  Compare Now

9325 is a 5mil transparent UHMW-PE (ultra-high molecular weight polyethylene) film tape.

Backing/Carrier PTFE - Skived
Adhesive Acrylic
Thickness 6.5 Mils
Adhesion
  Compare Now

2042-5 is a skived teflon with a pressure sensitive acrylic adhesive