Budnick Converting ^®

An advanced cloth tape that combines a highly conformable backing and an aggressive adhesive for holding down printing plates or carpet.

60760 is a soft PVC with a clean removal rubber adhesive system with durable PVC backing that provides excellent impact and scuff resistance.

105C is an 11 mil double coated cloth tape used for carpet hold-down especially designed for the convention industry.

100D is a 13 mil. double coated cloth tape used for carpet hold down & mounting. It replaces tack strips.

8709 is a 9.1 mil, double coated non-woven UHA. It is primarily used for bonding automotive trim carpeting. The double coated construction provides consistent lamination and performance on coarse, tufted carpets.

DF545 is a 15.5 mil, double coated cloth tape used for carpet hold-down for convention trade & general purpose maintenance.

DF642 is a 12.0 mil, general purpose, industrial grade, double-faced cloth tape. It is used as industrial holding, mounting, splicing and installation of carpet.

P55 is a flame retardant, double-coated cloth tape primarily used in industrial applications where flame retardant material is demanded.

The GS-Series are made up of an unsupported SBR pressure sensitive adhesive in thicknesses of 5 to 50 mils.

S56 adhesive is zone coated on edges of hand tearable and puncture resistant cloth backing creating a non-adhesive tunnel for wires, cables or cords to lay (pass) under. Removes easily from carpet and other surfaces without leaving a residue. Can be repositioned several times without loss of adhesion.

P306L is a, 10 mil, heavy-duty, interlined PVC film tape. It is used as a corrosion resistant covering of pipe and conduits or as a moisture barrier on floor panels of commercial aircraft.

This permanent cotton cloth adhesive tape features a cotton cloth substrate coated on both sides with an aggressive synthetic hot melt rubber adhesive in white and offers a gold siliconized paper release liner.

DCCLOTH 3502 is a hand tearable, clean removable 12 mil double coated woven cotton cloth tape coated on both sides with a moderate tack natural rubber adhesive. The white siliconized polyethylene release liner allows for easy removal.

DUCTCLO 3740 is an 11.8Mil, 70 mesh, high quality polyethylene-coated cloth duct tape with natural rubber/synthetic adhesive. This striped safety warning tape is used for permanent and temporary marking of hazardous areas, aisles, stairs, wires, cords, and more.

DUCTCLO 3880 is an 11.8mil low gloss mesh cloth tape with a natural rubber adhesive. The center length on the adhesive side of the tape has a plastic coating which creates an adhesive-free zone, or channel, for cables so they do not become gummy with adhesive residue.

DCPETCLO 3575 is an 11mil (0.275mm) cotton/polyester blend cloth coated on both sides with a high shear, moderate tack natural rubber-based adhesive system. Clean removable with no residue.

DCCLOTH 3502 is a hand tearable, clean removable 12 mil double coated woven cotton cloth tape coated on both sides with a moderate tack natural rubber adhesive. The white siliconized polyethylene release liner allows for easy removal.