Budnick Converting ®
Pregis
4188
4 mil Polyethylene Surface Protection
A 4.0 mil. polyethylene tape with a high adhesion specifically designed to protect textured laminates, brushed metals and coarse plastic materials. Tape should be applied and removed at a temperature not less than 60°F. Avoid exposure to water which may cause adhesive residue. Not designed for prolonged exposure to direct sunlight for extended periods.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | 450.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 15 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- High adhesion/ coating wieght adhesive will not lift after application to granular surfaces
- 4.0 mil. backing enhances abrasion resistance
- Transparent backing allows inspection without tape removal
- Elastic backing withstands most forming operations
- Reduces labor costs
- Reduces reworks, rejects and scrap
Adhesive Tape Applications
- Protection of thresholds from abrasions due to equipment and foot traffic in entrance areas
Adhesive Tape Colors
- Blue
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.