Converting Ideas into Solutions ®

Permacel/Nitto Denko America

Stickyback Foam Mounting Tapes

587A is a 15 mil, PVC foam, flexographic printing plate mount. It is a dependable mount for both rubber & photopolymer printing plates. 587A provides quick repositioning and residue free removal once the print run is completed.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 15 Mils
Adhesion (liner) 46 oz/in
Adhesion (unwind) 46 oz/in
Min. Application Temp
Min. Service Temp
Max Short-Term Temp
Max Long-Term Temp

Product Features

  • Adhesion to rubber = 30 oz/in on both sides
  • Suitable for rubber or photopolymer printing plates
  • Repositionable
  • Residue free removal
  • Specially formulated adhesive assures firm bond between cylinder & printing plates
  • High cohesive-strength adhesive & firm anchorage to tape's foam carrier allows easy repositioning of plates & clean removal
  • Consistent thickness makes certain that the plate is at the correct distance from the printing surface throughout the entire print run

Adhesive Tape Applications

  • Rubber printing plate mounting
  • Photopolymer printing plate mounting

Adhesive Tape Colors

  • White

We're sorry, there are no sizes currently available for this product.

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!