Budnick Converting ®
econOtape
DUCTFOIL 4092
6.8Mil Aluminum F/S/K Tape
DUCTFOIL 4092 is a 6.8 Mil aluminum foil tape featuring a dead soft aluminum foil/3-way fiberglass scrim/paper carrier coated with an aggressive synthetic rubber resin adhesive carried on a 3.2 mil removable paper release liner. This tape's malleable foil conforms well to irregular and curved surfaces to maximize adhesive contact and provide quick, positive grab to the insulation surface. DUCTFOIL 4092 is used as a closure system for fiberglass and mineral wool insulation systems that are faced with foil, to seal seams and joints on aluminum faced fiberglass duct board, and to provide a vapor barrier that assures the integrity of the system.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Aluminum |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.8 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 90 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -4° F |
| Max Short-Term Temp | 176° F |
| Max Long-Term Temp |
Product Features
- 4.8Mil FSK Backing
- Aggressive Synthetic Rubber Adhesive System
- Conforms Well to Irregular and Curved Surfaces
Markets Served
- Industrial
Adhesive Tape Applications
- Closure System for Fiberglass and Mineral Wool Insulation Systems
- Sealing Seams and Joints on Aluminum Faced Fiberglass Duct Board
- Provide a Vapor Barrier
Adhesive Tape Colors
- Aluminum
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.