Budnick Converting ®
DeWal Industries / Rogers Corp.
204-2
PTFE Skived Film Tape
204-2 is a 3.5 mil, skived & PTFE film that is coated with "high temperature" silicone adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than regular skived film. Those products are used primarily in electrical appliances such as coil wraps and separators, transformer, slot liners and harness wrapping where good insulation and heat resistance are needed. There are also used in mechanical applications requiring high temperature resistance and a non-stick surface such as roll protection in flat die extrusion.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PTFE - Skived |
|---|---|
| Adhesive | Silicone |
| Thickness | 3.5 Mils |
| Tensile | 30.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- UL approved Flame Retardant / Cold Resistant
Adhesive Tape Applications
- Used primarily in electrical applications such as:
- Coil wraps and separators
- Transformer
- Slot liner
- Harness wrapping
- Mechanical applications such as roll protection in flat die extrusion
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.