Budnick Converting ®
Avery Dennison
FBA 7918 GL
Emulsion Acrylic Double Coated Scrim
FBA 7918 GL is a 3.6 mil. double coated scrim with low VOC modified acrylic adhesive. It bonds well to low surface energy materials and has excellent foam bonding properties. 7918 is commonly used for general industrial foam bonding an where low VOC properties are required.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Silicone Resin Coated Glass |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.6 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 104 oz/in |
| Adhesion (unwind) | 104 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- Polyester scrim reinforced
- Emulsion Acrylic
- Low outgassing modified acrylic
- Glassine release liner
- Conforms without stretching
- Dimensional stability for die and waterjet converting
Markets Served
- Automotive
- Construction
- Extruders of Plastic and Rubber
- Industrial
- Marine
- Recreational
Adhesive Tape Applications
- General industrial foam bonding
- Bonding where low VOC is required
- Foam and elastomer bonding
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.