Budnick Converting ®
3M
VHB™ Tape LVO-060BF
25 Mil Black Low VOC High Bond Acrylic Foam Tape
3M™ VHB™ Tape LVO-060BF is a 0.025 inch (0.6 mm) thick, black, double-sided acrylic foam tape designed with a polyethylene film liner. It features a low-odor adhesive on both sides that adheres well to a wide variety of materials, including plastics like polypropylene and polystyrene. The tape's flexible foam core conforms easily to uneven surfaces, ensuring a strong, consistent bond even when substrates aren't perfectly aligned. As part of 3M’s Low VOC and Odor (LVO) family, LVO-060BF offers the same clean-performance characteristics found across the series, in a thinner profile ideal for tight tolerance applications.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Acrylic Foam |
|---|---|
| Adhesive | Acrylic |
| Thickness | 25 Mils |
| Tensile | 140.00 lbs/in |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) | 208 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp | 250° F |
Product Features
- 85% reduced VOC’s compared to common acrylic foam tapes, tested to VDA278 standard
- Low in Odor – tested to VDA270 standard
- Fast and easy-to-use permanent bonding method provides high strength and long-term durability
- Virtually invisible fastening keeps surfaces smooth
- Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives
- Closed-cell foam creates a seal against water and moisture
- Pressure sensitive adhesive bonds on contact to provide immediate handling strength
- Allows the use of thinner, lighter weight and dissimilar materials
- This product might be suitable for use in indirect food contact applications. Please see the applicable Regulatory Data Sheet for more information relating to FDA compliance.
Markets Served
- Aerospace
- Appliance
- Automotive
- Construction
- Electronics
- Extruders of Plastic and Rubber
- Industrial
- Marine
- Medical Device
- Signage, Banners, & Printing
- Truck and trailer body
Adhesive Tape Applications
- Ideal for low surface energy materials, while also working on medium and high surface energy substrates
- A go-to solution for interior industrial applications, such as automotive, electronics, food and beverage, and general manufacturing
- Comercial vehic le roof attachment
- Panel to frame
- Exterior mirror and fixture attachment
- Glass bonding
- Bonding a logo to an appliance
- Trim and molding attachment
- Gasket assembly
- Light cover attachment
- Appliance trim attachment
- Bonding composite materials
- LCD display frame attachment
- Panel to frame/stiffner to panel assembly
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.