Budnick Converting ®
3M
468MP
5.2 mil High Performance Acrylic Transfer
A 5.2 mil. laminating tape featuring 200MP hi-performance acrylic adhesive on a polycoated paper liner used for bonding, laminating and assembly of membrane switches. 200MP adhesive is initially repositionable, then builds to a high ultimate bond strength. Bond will hold securely after exposure to numerous chemicals including gasoline, oil, Freon TF, sodium chloride solution, mild acids and alkalis.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5.2 Mils |
| Tensile | |
|---|---|
| Elongation | 1915.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 113 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp | 300° F |
Product Features
- 5.2 mil. 200MP acrylic adhesive
- 3MT Adhesive 200MP is a popular choice for graphic attachment and membrane switch applications because it has excellent quality, consistency and durability
- Adhesive is virtually free of vapor inclusions that are commonly found in adhesives produced by the traditional solvent coating technique
- Excellent high temperature performance as well as excellent shear strength that minimizes edge lifting and slippage of parts
- Adhesive performs well after exposure to humidity and hot/cold cycle
- Resistant to high humidity, UV exposure and immersion in water
- Excellent resistance to harsh environments
- Provides some initial repositionability when bonding to plastic parts
Markets Served
- Electronics
- Commercial printing
- Industrial
- Appliance
Adhesive Tape Applications
- Long term bonding of nameplates and decorative trim
- Excellent adhesive for bonding metal and plastic nameplates
- Lamination of wood veneers and plastics
- Lamination to back printed polycarbonate or polyester graphic overlay materials
- Assembly of membrane switches, including spacers for circuit separation graphic overlay for switch display and bonding the complete switch to the application surface
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.