Budnick Converting ®
3M
1915-
***Discontinued*** Flexographic Cushion-Mount
Discontinued A 17.0 mil double coated pink plate mounting tape with differential acrylic adhesives on each side of the foam carrier. The liner side adhesive is designed for bonding to photopolymer plates. This foam is excellent for combination and solid printing all on the same plate. Specify 'M' for Modified Plate Side Adhesion, 'EH' for High Plate Side Adhesion, 'E' for Air Release Liner, or 'S' for Urethane Sleeve.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | |
| Thickness | 17 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) | 20 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Photopolymer plate (30 oz/in)
- Medium density foam
- Heat resistance (150°)
- Excellent water resistance
- Excellent alkanes resistance
- Excellent combination and solid printing
- Better tone reproduction
- Soft support improves tone reduction when process and halftone images predominate
Adhesive Tape Applications
- Permanent/Temporary holding
- Flexographic printing
Adhesive Tape Colors
- Pink
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.