Converting Ideas into Solutions ®

Saint-Gobain
V2845

Double Coated, Closed Cell Polyurethane Foam

V2845 is a 45 mil thick, closed cell polyurethane, that is double coated with an acrylic adhesive. This is a multipurpose foam that's primarily used for dissipation of vibrations and to distribute stresses and forces over the entire bond line. The adhesive on the liner side has been specifically formulated to provide an ultra high bond especially in severe exterior applications. V2845 is the same product on a medium density poly liner that has a tighter release. Normount® V2800H series.

Product Properties Related Information Custom Quote

Converting Services

At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.

Backing/Carrier PU - Polyurethane
Adhesive Acrylic
Thickness 45 Mils
Tensile
Elongation 260.00%
Adhesion (liner) 100 oz/in
Adhesion (unwind) 100 oz/in
Min. Application Temp 60° F
Min. Service Temp -40° F
Max Short-Term Temp 200° F
Max Long-Term Temp

Product Features

  • Easy release polyethylene liner excels in automated production
  • Excellent aging properties and all-weather environmental resistance
  • Dynamic Shear Adhesion= 120PSI
  • Density=34 lbs/cu ft
  • Tensile Strength of Foam=140PSI
  • UV light resistant
  • Extreme temperature resistant
  • Fungi, oxidation & ozone resistant
  • Stress distribution reduces pressure points, thereby minimizing distortion
  • Reduces/eliminates use of liquid adhesives, screws, rivets, welds and subsequent surface refinishing
  • Conformable polyurethane foam promotes maximum surface contact
  • Excellent quick-stick speeds

Adhesive Tape Applications

  • Prevents corrosion of two dissimilar materials
  • Aids in relieving forces caused by thermal expansion and contraction between bonded parts
  • Mounting emblems and ornamentation

Adhesive Tape Colors

  • Black

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!