Budnick Converting ®

Contact Us/Request a Quote

Converting Ideas into Solutions ®

3M
VHB™ Tape 4910

40 Mil Clear Solid Acrylic Foam Tape

3M™ VHB™ Tape 4910 is a 40 mil, double sided, clear solid acrylic. The general purpose adhesive bonds to most higher surface energy substrates including metal, glass and high surface energy plastics. In many cases it can replace rivets, spot welds, liquid adhesives or other permanent fasteners.

Print Datasheet Share
Product Properties Related Information Custom Quote

Converting Services

At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.

Backing/Carrier Acrylic Foam
Adhesive Acrylic
Thickness 40 Mils
Tensile 100.00 lbs/in
Elongation
Adhesion (liner) 240 oz/in
Adhesion (unwind) 240 oz/in
Min. Application Temp 50° F
Min. Service Temp -40° F
Max Short-Term Temp 200° F
Max Long-Term Temp 300° F

Product Features

  • Clear acrylic construction
  • Static Shear measured at 72°F 1/2 sq. in. loadings on stainless steel will hold 1,000 grams over 10,000 minutes ASTM D-3654
  • Dynamic shear to stainless steel ASTM D-1002: 70lb/sq. in.
  • High tensile strength
  • High shear and peel adhesion
  • Resistant to solvents
  • Resistant to moisture

Adhesive Tape Applications

  • Joining transparent material
  • Seal skylight inner & outer dome
  • Mount back lit translucent signs
  • Edge bond resin filled glass

Adhesive Tape Colors

  • Clear

Comparable Products

Saint-Gobain

V2845

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!