Budnick Converting ®
3M
9502
Adhesive Transfer Tape
9502 is a 2.3 mil adhesive transfer tape with 220 adhesive. It is an economical choice for general industrial bonding of metals, painted metals, and high surface energy plastics.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp | 250° F |
Product Features
- 3M 220 acrylic adhesive
- Static Shear with 2,000 gram load at 70°F is 5,000 minutes to fail
- Resistant to occasional splashes of organic materials including MEK, automotive oil, weak acid and base solutions and gasoline
- Resistant to humidity and intermittent water exposure
- Not recommended for low energy plastics (polypropylene, polyethylene, powder coated paints)
Adhesive Tape Applications
- Attachment of nameplates, appliques and decorative trim to metal and high surface energy plastics
- Lamination to sub-surface printed polycarbonate or polyester graphic overlay materials
- Often used in cost-effective, long-term bonding applications
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.