Budnick Converting ®
Avery Dennison
1150
High Temperature Acrylic Transfer
FT 1150 is a 2.0 mil, high temperature acrylic transfer. It is primarily used for the permanent mounting of foil, metal and plastic nameplates and decorative trim. It is particularly useful for the application of their metal nameplates where conformability is required. Specification #56486
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 60 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 275° F |
| Max Long-Term Temp | 225° F |
Product Features
- Specially formulated acrylic adhesive
- Densified kraft release liner
- Static Shear: 5.5 lbs. at 72°F upon a 1" square area>10,000 minutes to failure
- Bonds to a variety of substrates
- Elevated temperature, solvent and UV resistance
- Excellent die cutting and liner removal characteristics
Adhesive Tape Applications
- Designed for the permanent mounting of foil, metal and plastic nameplates and decorative trim. It is particularly useful for the application of metal nameplates where conformability is required.
- ABS plastic
- Aluminum-anodized
- Foam-polyester urethane
- Ceramic
- Metal
- PVC-mildly plasticized
- Stainless
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.