Budnick Converting ®
3M
415
Double Coated Film Tape
A 4.0 mil. double coated tape featuring A-40 acrylic adhesive with a polyester backing used for bonding similar and dissimilar materials, such as metals, glass, wood, papers, paints and plastics. A-40 is a pressure-sensitive, medium firm acrylic adhesive system. It features an excellent balance of good initial adhesion (quick-stick) and good shear holding power. 415 tape is also available in a razor slit configuration which provides a non-tear feature.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 25 oz/in |
| Adhesion (unwind) | 25 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp | 150° F |
Product Features
- A-40 acrylic adhesive
- Polyester film backing
- 4.0 mil. paper liner
- Bonds a wide variety of materials
- Good initial adhesion
- Good shear holding power
- Non-tearing
Adhesive Tape Applications
- High-speed flying splices on most grades of paper such as newsprint, clay coated and corrugated stocks
- Splicing of foils, films and fabrics
- Laminating adhesive for foams and photos
- Mounting promotional items and posters
- Mounting rubber or photopolymer printing plates
- Miscellaneous joining and holding where high initial adhesion, easy liner release and a thin, long aging bond is required
Adhesive Tape Colors
- Clear
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.