Call 800-282-0090

General Purpose Tensilized Polypropylene

General Information
4090 is a 2.7 mil, tensilized polypropylene strapping tape with an aggressive rubber adhesive used mostly for light duty bundling of metal & plastic. It is available in black and white.
Backing Adhesive
Liner Type
TPP - Tensilized Polypropylene Rubber 2.70 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
47.00 oz/in Pressure 95.00 lbs/in 35.00%
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F 0 °F    
Adhesive Tape Features
  • The synthetic rubber adhesive adheres very well to all corrugated grades
  • Impact strength allows give-and-take without snapping
  • The TPP backing has excellent elongation allowing the tape to conform well around pallet loads, ensuring the stability of your pallets
  • Good tensile strength
  • Good initial tack and shear resistance
Adhesive Tape Applications
  • Used for palletizing and unitizing corrugated and paper board boxes
  • Non-critical bundling applications
Adhesive Tape Markets Served
  • Industrial
Adhesive Tape Colors
  • Black
  • Clear
  • White
Comparable products
Backing Adhesive Thickness Adhesion
 TPP - Tensilized Polypropylene   Rubber   2.70mil   47.00oz/in 
Backing Adhesive Thickness Adhesion
 PP - Polypropylene   Acrylic   2.80mil   34.00oz/in 
Backing Adhesive Thickness Adhesion
 PP - Polypropylene   Rubber   2.80mil   45.00oz/in 
Backing Adhesive Thickness Adhesion
 PP - Polypropylene   Rubber   2.80mil   54.80oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).