Converting Ideas into Solutions ®

Saint-Gobain
V742

.063" Single Coated, 9# Closed Cell PVC Foam

V742 is a 1/16" thick, 9#, closed cell PVC, with an acrylic adhesive on one side. It is a multi-purpose, medium density foam that is ideal for light, air, and moisture seals. Norseal® V740 series.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Acrylic
Thickness 62.5 Mils
Tensile
Elongation 100.00%
Adhesive Activation Pressure
Adhesion (unwind) 16 oz/in
Min. Application Temp 40° F
Min. Service Temp -15° F
Max Short-Term Temp 160° F
Max Long-Term Temp 160° F

Product Features

  • Paper liner
  • Flexible backing
  • Tensile strength : 40PSI
  • Density : 9lbs./cu. ft.
  • Dimensionally stable, will not drip, ooze, or run when under compression
  • Aggressive adhesive keep the foam in place during assembly process
  • Multipurpose medium density foam offers an economical alternative to caulks and sealants
  • Conforms to curved and irregular shapes
  • Resistant to weathering, fungi, and oxidation
  • Flexible at low temperatures

Markets Served

  • Construction
  • Truck and trailer body
  • Automotive
  • Electronics
  • Appliance

Adhesive Tape Applications

  • Appliance seals
  • Wall panels
  • Die cut gaskets
  • Window and door weatherstripping
  • Truck, cab, and body seals
  • Foundation to sill gaskets
  • Electronic equipment
  • Access doors
  • Seals for flashing

Adhesive Tape Colors

  • Gray

Comparable Products

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!