Call 800-282-0090

Flame Retardant Double-Coated Cloth Tape

General Information
This tape is engineered to meet the stringent requirements of the aviation industry. It is widely used for installing carpeting on interior floors and stairways of commercial aircraft. P55 is heavy-duty and ideal for commercial carpet installation to rough flooring.
Backing Adhesive
Liner Type
Uncoated Cloth Rubber 13.00 mil 4 mil Paper
Adhesion to Steel
180° Peel
adhesion to steel 180° peel - liner side Tensile Strength Elongation Percent
125.00 oz/in 125.00 oz/in    
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F 0 °F    
Adhesive Tape Features
  • Flame retardant
  • Great for adverse environments
  • Quick, easy and clean to use
  • High performance rubber adhesive provides quick stick properties but superior bonding properties that improve with age
  • Cloth backing provides excellent strength and superior conformability
  • Adhesive bonds well to the cloth backing offering minimal residue during removal helping improve productivity during maintenance and repair
  • FAR 25.853 approval for flame retardancy and ABD0031-E para 6.3, 7.3, 7.3.1 and 7.3.2 Table 1 for smoke density and toxic gas emissions
Adhesive Tape Applications
  • Fastening automobile carpets
  • Splicing foils, plastics, metals, cloth or glass
  • Wherever flame retardant adhesive is a must
  • As an insulation blanket between exterior skins & interior walls
  • Engineered to meet stringent requirements of aviation industry - widely used for installing carpeting on interior floors and stairways of commercial aircraft
  • Ideal for commercial and institutional carpet installation work, especially on rough surfaces such as concrete or unfinished wooden floors
  • Mounting kick plates to mount trim strips where walls meet pre-hung ceiling
Adhesive Tape Markets Served
  • Automotive
  • Aerospace
Adhesive Tape Colors
  • White
Comparable products
Backing Adhesive Thickness Adhesion
 Uncoated Cloth   Rubber   13.00mil   125.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).