Call 800-282-0090

PVC 4700
5.2mil SPVC Tape

General Information
PVC 4700 is a 5.2mil matte surface soft PVC coated in a synthetic rubber adhesive. This superior quality product has a long shelf life and write-on capabilities. It provides a very effective vapor and moisture barrier. This tape is highly conformable and resistant to aging, sun, water, fungus, bacteria, oil, acids, alkalies, and corrosive chemicals while providing good abrasion, imact, and rupture resistance. PVC 4700 is used for color coding, lane marking, and safety coding to meet OSHA requirements. It is also used in decorating, striping on vehicles, boats, sporting equipment, and more. It is a good masking for hard chrome plating and anodizing, and can also be used as a pipe wrap and duct joint sealer.
Backing Adhesive
Liner Type
PVC - Polyvinylchloride Rubber 5.20 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
18.00 oz/in Pressure 14.00 lbs/in 150.00%
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F      
Adhesive Tape Features
  • Superior Quality Tape with Long Shelf Life
  • Write-On Capabilities
  • Provides Effective Vapor and Moisture Barrier
  • Resistant to Aging, UV, Water, and Several Different Chemicals
  • Provides Good Abrasion, Impact, and Rupture Resistance
Adhesive Tape Applications
  • Color Coding
  • OSHA Lane Marking and Safety Coding
  • Decorating
  • Vehicle, Boat, and Equipment Striping
  • Masking for Hard Chrome Plating and Anodizing
  • Harnessing
  • Pipe Wrapping
  • Duct and Joint Sealing
Adhesive Tape Markets Served
  • Automotive
  • Commercial
  • Industrial
  • Marine
  • Recreational
  • Truck and trailer body
Adhesive Tape Colors
  • Black
  • Clear
  • Green
  • Gray
  • Orange
  • Purple
  • Red
  • White
  • Yellow
  • Emerald
  • Dark Blue
  • Light Blue
  • Dark Brown
Comparable products
Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Rubber   5.20mil   18.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).