Call 800-282-0090


MAGNET 5240
60 mil indoor adhesive magnet



General Information
MAGNET 5240 is a 60 mil thick indoor single faced self-adhesive magnetic tape which is comprised of a MULTIPOLE ONE FACE FLEXIBLE MAGNET (a composite of strontium and/or barium ferrite particles oriented with a thermoplastic polymer matrix). It is laminated with a 3.3 mil double coated, aggressive general purpose rubber based PET tape. It is supplied self-wound on a semi-bleached kraft paper liner. These permanent magnets remain magnetized indefinitely if not subjected to a demagnetizing force. MAGNET 5240 is made for general purpose bonding applications to foams, felts, cloths, primed wood, paper, metal, plastics and most low or un-plasticized substrates. It has a good balance of economy and performance.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
  Rubber 62.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
7.00 oz/in      
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
  • Aggressive Rubber-Based Adhesive System
  • Flexible Magnet
  • Polyester Carrier Provides Dimensional Stability and Superior Die-Cutting Properties
Adhesive Tape Applications
  • General Purpose bonding to Multiple Substrates
Adhesive Tape Markets Served
  • Industrial
Adhesive Tape Colors
Comparable products
Backing Adhesive Thickness Adhesion
    Rubber   62.00mil   7.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).