Call 800-282-0090


Home > Data Sheet
DUCTFOIL 4060
4.8 mil Aluminum Foil Tape



General Information
DUCTFOIL 4060 is a 4.8 mil aluminum foil tape consisting of a 3mil high strength dead soft aluminum foil coated with an aggressive solvent-based acrylic adhesive and an easy removable paper liner. Its malleable foil conforms well to irregular and curved surfaces. This tape performs excellently at both low and high temperatures, and can be applied at low temperatures. DUCTFOIL 4060 is used for waterproof sealing, vapor barrier and leak protection, heat reflection/dissipation, and masking in paint stripping and electroplating. DUCTFOIL 4060 is also excellent for die-cutting.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
Aluminum Acrylic 4.80 mil Paper
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
72.00 oz/in Pressure   5.50%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
40 °F -40 °F 302 °F  
Adhesive Tape Features
  • 3Mil High Strength Dead Soft Aluminum Foil
  • Aggressive Solvent-Based Acrylic Adhesive System
  • Malleable Foil Conforms Well to Irregular and Curved Surfaces
  • Excellent High and Low Temp Performance
  • Low Temp Application Capable
Adhesive Tape Applications
  • Waterproof Sealing
  • Vapor Barrier and Air Leakage Protection
  • Heat Reflection/Dissipation
  • Masking for Paint Stripping and Electroplating
  • Die-Cutting
Adhesive Tape Markets Served
  • Industrial
Adhesive Tape Colors
  • Silver
Comparable products
Backing Adhesive Thickness Adhesion
 Aluminum   Acrylic   4.80mil   72.00oz/in 
Backing Adhesive Thickness Adhesion
 Aluminum   Acrylic   5.00mil   60.00oz/in 
Backing Adhesive Thickness Adhesion
 Aluminum   Acrylic   4.60mil   50.00oz/in 
Backing Adhesive Thickness Adhesion
 Aluminum   Acrylic   3.00mil   75.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).