Budnick Converting ®
econOtape
DUCTFOIL 4030
3.6 mil Aluminum Foil Tape
DUCTFOIL 4030 is a 3.6mil aluminum foil tape consisting of a 2mil dead soft aluminum foil coated with an extremely aggressive synthetic rubber adhesive and a removable release liner. The adhesive system provides a tight positive grab when smoothed down on work surfaces. DUCTFOIL 4030 is used in fiberglass duct board systems on seams and joints to maintain the integrity of the vapor barrier. It can also be used on FSK systems. This tape's malleable foil conforms well to irregular and curved surfaces.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Aluminum |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.6 Mils |
| Tensile | 17.80 lbs/in |
|---|---|
| Elongation | 3.50% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 90 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -4° F |
| Max Short-Term Temp | 176° F |
| Max Long-Term Temp |
Product Features
- Extremely Aggressive Synthetic Rubber Adhesive System
- Provides Tight, Positive Grab
- Conforms Well to Irregular and Curved Surfaces
Markets Served
- Industrial
Adhesive Tape Applications
- Fiberglass Duct Board Seams and Joints
- FSK Systems
Adhesive Tape Colors
- Silver
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.