Call 800-282-0090

11.8mil Cable Management Tape

General Information
DUCTCLO 3880 is an 11.8mil low gloss mesh cloth tape with a natural rubber adhesive. It is used to manage cables, cords and wires, and to avoid accidentally tripping and unplugging in warehouses, convention centers, theatres, etc. The center length on the adhesive side of the tape has a plastic coating which creates an adhesive-free zone, or channel, for cables so they do not become gummy with adhesive residue. DUCTCLO 3880 removes cleanly from most surfaces and is hand-tearable.
Backing Adhesive
Liner Type
Polyethylene Coated Cloth Rubber 11.80 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
29.00 oz/in Pressure 36.00 lbs/in  
Min Application
Min Service
Max Short-Term
Max Long-Term
40 °F -31 °F 176 °F  
Adhesive Tape Features
  • 11.8 Mil Low-Gloss Cloth Tape
  • Adhesive-Free Center Channel
  • Clean Removable
  • Hand-Tearable
Adhesive Tape Applications
  • Cable Management
Adhesive Tape Markets Served
  • Arts & Entertainment
  • Commercial
  • Industrial
Adhesive Tape Colors
  • Black
Comparable products
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   11.80mil   29.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).