Call 800-282-0090


Home > Data Sheet
ADHTRANS 3010
1 mil Extended Liner Transfer



General Information
This Reverse Wound Permanent Hot Melt Rubber Transfer Tape offers a 1.0 mil synthetic rubber adhesive with a 42# silicone-coated Kraft paper with a finger-lift edge. It provides a permanent surface-to-surface bond with a strong initial tack. This tape will not bleed through lightweight materials, and it has high overall adhesion. This transfer tape is perfect for paper-to-paper attachments, signs and posters, envelope sealing, and direct mail pieces. It is also good for paper web splicing, labels and business forms, high speed presses and collaborators, as well as spot and strip tape applications.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
  Rubber 1.00 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
105.82 oz/in Pressure    
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
40 °F 0 °F 200 °F  
Adhesive Tape Features
  • Provides a permanent surface-to-surface bond
  • Strong initial tack
  • Will not bleed through materials
  • High overall adhesion
Adhesive Tape Applications
  • Paper-to-paper
  • Signs and Posters
  • Envelope Sealing/Direct Mail
  • Paper Web Splicing
  • Labels and Business Forms
  • High Speed Presses and Collaborators
  • Spot and Strip Tape Applications
Adhesive Tape Markets Served
  • Arts & Entertainment
  • Commercial printing
  • Paper products
  • Plastic bag manufacturing
  • Point of Purchase
Adhesive Tape Colors
Comparable products
Backing Adhesive Thickness Adhesion
 N/A   Rubber   1.00mil   105.82oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).