Call 800-282-0090


Home > Data Sheet
8302
Double Coated Polyester



General Information
8302 is a 3.6 mil double coated rubber tape with a 0.5 mil polyester carrier. 8302 is primarily used for foam laminating and general bonding of substrates. Specification # 46482.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PET - Polyester Rubber 3.60 mil Paper (60# Densified kraft)
Adhesion to Steel
180° Peel
adhesion to steel 180° peel - liner side Tensile Strength Elongation Percent
145.00 oz/in 124.00 oz/in    
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
50 °F 0 °F 175 °F 150 °F
Adhesive Tape Features
  • Static shear is >1,200 minutes to fail when 5.5# is put on a 1" square area
  • Bonds to a broad range of substrates
  • Stability in processing and die cutting
  • Developed as an economical, general purpose product
  • Rubber based adhesive system coated on a PET film carrier
Adhesive Tape Applications
  • General bonding of substrates
  • Mounting trims and plastic parts
  • Lamination to foam
Adhesive Tape Markets Served
  • Plastic bag manufacturing
  • Point of Purchase
  • Industrial
Adhesive Tape Colors
  • Natural
Comparable products
Backing Adhesive Thickness Adhesion
 PET - Polyester   Rubber   3.60mil   145.00oz/in 
Backing Adhesive Thickness Adhesion
       mil   oz/in 
Backing Adhesive Thickness Adhesion
 PET - Polyester      3.40mil   160.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).