Budnick Converting ®
3M
9667MP
High Performance Adhesive Transfer Tape
A 2.3 mil. tape with adhesive 200MP, perfect for graphic attachment and membrane switch applications due to it's excellent quality, consistency and durability. In addition, as a result of 3M's innovative, proprietary process, adhesive 200MP also offers the following excellent performance characteristics. Clarity - virtually free of vapor inclusions that are commonly found in adhesives produced by the traditional solvent coating techinique. Excellent high temperature performance as well as excellent shear strength (minimizes edge lifting and slippage of parts). Excellent resistance to harsh environments; this adhesive can withstand splashes of organic solvents, weak acids and bases and salt water, cleaning solutions, germicidals, disinfectants, oils, etc. In addition, it performs well after exposure to humidity and hot/ cold cycles. Provides some initial repositionability when bonding to plastic parts (not metal). This allows graphic parts to be lifted and repositioned if initial alignment is incorrect. Tape is provided with a variety of liner configurations to help ensure excellent process flexibility. Adhesive 200MP is not recommended for low energy plastics. See 3M data sheet for Adhesion Retention after Immersion and Exposure chart and Electrical, Mechanical and Thermal Properties chart.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.3 Mils |
| Tensile | 55.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 82 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | -31° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp | 300° F |
Product Features
- 90° peel adhesion to aluminum = 77 oz./in.
- 90° peel adhesion to ABS = 62 oz./in.
- 90° peel adhesion to acrylic = 61 oz./in.
- 90° peel adheison to glass = 80 oz./in.
- 90° peel adhesion to polycarbonate = 58 oz./in.
- 90° peel adhesion to rigid PVC (unplasticized) = 52 oz./in.
- Static Shear at 70°F for 2000 grams = 10,000 minutes to failure
Adhesive Tape Applications
- To apply narrow strips of adhesive: Manual Dispensers - P52, P56
- Define Length Dispensers - M96
- Semiautomatic Dispensers - S625 w/ attachment, T646
- Long term bonding of graphic nameplates and overlays
- Bonding metal nameplates and rating plates
- Bonding graphic overlays for membrane switches and for bonding the complete switch to the equipments surface
- High speed processing of parts
- Lamination to industrial foams for rotary die-cutting of small gaskets
Adhesive Tape Colors
- Clear
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.