Budnick Converting ®
3M
9495MP
Double Coated Tape with 200MP Adhesive
A 5.6 mil. tape with a polyester backing and 200MP acrylic adhesive coated on both sides used for graphic overlays and attaching LED lenses. The carrier provides improved handling with ease of slitting and die-cutting. 200MP hi-performance adhesive provides exceptional temperature and chemical resistance, while withstanding tough application environments. However, this product is not recommended for low energy plastics, such as polypropylene and polyethylene. Available with a 2 mil clear polyester liner as 9495MPF.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5.6 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 82 oz/in |
| Adhesion (unwind) | 82 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 250° F |
Product Features
- Available with a 2 mil clear polyester liner as 9495MPF
- 90° peel adhesion to acrylic: 60oz./in.
- 90° peel adhesion to polycarbonate: 60oz./in.
- 90° peel adheison to ABS: 62oz./in.
- Shear Strength: 1000 gms. at 72°F for 10,000min.
- Shear Strength: 500 gms at 158°F for 10,000 min.
- Thin polyester carrier provides dimensional stability and improved handling
- Ease of die-cutting and lamination compared to adhesive transfer tapes
- Provides exceptional temperature and chemical resistance
- Withstands tough application environments
Adhesive Tape Applications
- Graphic overlays, nameplates, appliques and decorative trim
- Attaching LED lenses in cellular phones and pagers
Adhesive Tape Colors
- Clear
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.