Call 800-282-0090


Home > Data Sheet
9472LE
Low Surface Energy Laminating Adhesive



General Information
A 5.2 mil. laminating tape featuring 300LSE hi-strength acrylic adhesive on a polycoated liner used for nameplates, graphic overlays, membrane switches and identification material. When 9472LE tape is properly applied, nameplate and decorative trim parts will hold securely after exposure to numerous chemicals including oil, mild acids and alkalis. The bond strength increases as a function of time and temperature and offers very high initial adhesion.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
  Acrylic 5.20 mil Paper (4.2 mil. 58# polycoated kraft)
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
140.00 oz/in Pressure    
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
50 °F -40 °F 300 °F 200 °F
Adhesive Tape Features
  • 5.2 mil. 300LSE high strength acrylic adhesive (solvent free)
  • High initial adhesion
  • Very high bond strength to most surfaces
  • Excellent bond to low surface energy plastics
  • Excellent adhesion to lightly oiled surfaces
  • Use on smooth, rough and textured surfaces
  • Excellent graphic appearance
Adhesive Tape Applications
  • Plastic nameplates or graphic overlays on low surface energy plastics
  • Waste removed nameplates on a common sheet for ease of application
  • Attaching membrane switch assemblies to powder coated surfaces and low surface energy plastics
  • Graphic overlays with end tabs for easy liner removal
  • Graphic application to surfaces such as wood, fabric and plastic, where very high bond strength is required
  • Attaching indentification material to lightly oily surfaces typical of machine parts
Adhesive Tape Markets Served
  • Commercial printing
  • Point of Purchase
  • Industrial
Adhesive Tape Colors
Comparable products
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   5.20mil   140.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   5.00mil   125.00oz/in 
Backing Adhesive Thickness Adhesion
 N/A   Acrylic   5.00mil   160.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).