767, Hazard Marking Vinyl Tape, 3M, adhesive tape datasheet

Home >

3M 767
Hazard Marking Vinyl Tape

General Information

3M767 is a 5.0 mil. tape with a polyvinyl chloride backing and a rubber adhesive used in general purpose hazard/ safety marking applications which is printed in red and white stripes. While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquers, thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. Best results are attained when applied to a clean, dry surface at temperatures between 60°F to 80°F. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 60% relative humidity in the origianl carton.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Rubber	5.00 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
18.00 oz/in	Pressure	13.00 lbs/in	180.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
60 °F	0 °F	85 °F

Adhesive Tape Features

Polyvinyl chloride backing
Top side printed vinyl backing is conformable to many surfaces
Has red & white stripes
Rubber adhesive has good instant adhesion
Stays in place
Draws attention and enhances plant safety
Saves time with easier application

Adhesive Tape Applications

Marking of equipment pitch points or gears for warning purposes
Temporary floor marking around equipment or spills

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

3M 767

Hazard Marking Vinyl Tape

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	5.00mil	18.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

tesa tape inc 60760

Durable PVC Tape

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	5.90mil	22.80oz/in

Edit

Is Featured

Pricing Popup Link: javascript:showProductDialog(1333, true);

Recommended Rank: 80

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.