Budnick Converting ®
3M
766
Hazard Marking Vinyl Tape
A 5.0 mil. polyvinylchloride backed tape with rubber adhesive used for marking/ warning purposes and temporary floor markings. Printed in black and yellow stripes, 766 is a general purpose hazard marking vinyl tape for use in non-critical applications. While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacqure thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Rubber |
| Thickness | 5 Mils |
| Tensile | 13.00 lbs/in |
|---|---|
| Elongation | 180.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 18 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- 5.0 mil. rubber adhesive
- Polyvinylchloride backing
- Backing is conformable to many surfaces
- Black yellow striped
- Stays in place
- Draws attention
- Enhances plant safety
- Easy application saves time
- Good instant adhesion
Adhesive Tape Applications
- Marking of equipment pitch points or gears for warning purposes
- Temporary floor marking around equipment or spills
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.