Budnick Converting ®
3M
5413
Polyimide Film Tape
3M5413 is a 2.7 mil. tape consisting of a Kapton® polyimide film and silicone adhesive designed for high temperature applications. At room temperature, the properties of Kapton® and polyimide polyester films are similar, however, as the temperature increases of decreases, the properties of the Kapton® film are less affected than polyester. Kapton® film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures. To obtain best performance, use this product within 12 months from date of manufacture and store under normal conditions of 60°F to 80°F and 40% to 50% relative humidity in the original carton.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Polyimide |
|---|---|
| Adhesive | Silicone |
| Thickness | 2.7 Mils |
| Tensile | 33.00 lbs/in |
|---|---|
| Elongation | 62.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 22 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -100° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- Thin Kapton® polyimide film dimensionally stable at high temperatures
- Flame retardant, chemcial and radiation resistant
- Silicone adhesive has high temperature performance which reduces adhesive transfer
- High adhesive film bond reduces adhesive transfer
- Amber colored tape
- Higher productivity by reducing rework
- Protects surfaces, reduces replacement costs
- No cleaning required/ increases productivity
Adhesive Tape Applications
- Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process
- Release surface in fabrication of parts cured at elevated temperatures
Adhesive Tape Colors
- Amber
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.