447DL, Flexomount™ Solid Printing Tapes, 3M, adhesive tape datasheet

Home >

3M 447DL
Flexomount™ Solid Printing Tapes

General Information

447DL is a 9.8mil gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. The adhesive system has been developed for bonding to both photopolymer or rubber printing plates. This product is designed for solid and line work. The non-compressible vinyl carrier provides the consistent solid ink coverage required for this type of work.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Rubber	9.80 mil

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
50.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp

Adhesive Tape Features

Excellent adhesion to both rubber and photopolymer plates
High adhesion makes it a good choice for long runs and helps reduce tendency for plate edge lifting.

Adhesive Tape Applications

Designed for solid and line work
The non-compressible vinyl carrier provides the consistent solid ink coverage required for this type of work.

Adhesive Tape Markets Served

Adhesive Tape Colors

Gray

Comparable products

3M 447DL

Flexomount™ Solid Printing Tapes

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	9.80mil	50.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

tesa tape inc 4970

Double Coated White UPVC

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Acrylic	9.40mil	135.20oz/in

Edit

Is Featured

Pricing Popup Link: javascript:showProductDialog(182, true);

Recommended Rank: 80

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.