414DL, Flexomount™ Solid Printing Tape, 3M, adhesive tape datasheet

Home >

3M 414DL
Flexomount™ Solid Printing Tape

General Information

3M 414DL is a 2 mil, black, double coated vinyl with a firm rubber adhesive designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeve systems. The adhesive systems are specifically formulated for clean removability from both the plate and the print cylinder. The Flexomount™ solid vinyl carrier is designed for printing solids and line work. This product is double linered with a paper liner and a poly liner.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
	Rubber	2.00 mil	Poly

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
40.00 oz/in	40.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp

Adhesive Tape Features

Paper liner is 4mil
Poly liner is 4 mil
Density = 70#/ft3
Peel adhesion to Composite sleeve = 25oz/in
Peel adhesion to Photopolymer = 30 oz/in
Peel adhesion to Rubber = 50oz/in
Heat Resistance = 130°F
Higher temperature and solvent resistance
Firmer adhesive provides easier plate repositioning

Adhesive Tape Applications

Plate mounting in printing applications

Adhesive Tape Markets Served

Adhesive Tape Colors

Black

Comparable products

3M 414DL

Flexomount™ Solid Printing Tape

Backing	Adhesive	Thickness	Adhesion
	Rubber	2.00mil	40.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

tesa tape inc 52350

Photopolymer Plate Mounting for Flexographic Print

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	20.00mil	67.50oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.