Call 800-282-0090


Home > Data Sheet
2393
Premium High Temperature Masking Tape



General Information
3M masking tape 2393 is a 7.6mil smooth, heavy duty, mini-crepe, high temperature tape. It is specifically designed for those applications where easy removal after bake is important. It features a very high temperature heat resistant, smooth coated, rubber adhesive. Greater than 95% of the organic solvents used in manufacturing this product are recovered and used again. In addition, this product meets the heavy metals content as stated in Article 11 of European Directive 94/62/EC on packaging and packaging waste and the laws based on CONEG model legislation.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
Crepe Paper Rubber 7.60 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
32.00 oz/in Pressure 28.00 lbs/in 11.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
40 °F 0 °F 325 °F  
Adhesive Tape Features
  • Excellent paint mask performance with high solids paints and clear coats used in the transportation industry
  • Special adhesive offers excellent adhesion to and easy removability from both metal and plastic
  • Tape can be removed hot, warm, or cold from most surfaces without adhesive transfer
  • Balanced construction with stronger backing gives this tape easy removal properties without slivering
  • Excellent paint flake resistance
  • Instant adhesion, allowing tape to stick easily
  • Excellent holding power resists lifting or curling
  • Very conformable, maintaining integrity when formed around a corner
  • Solvent and moisture resistant helps resist bleed-through
  • Excellent high temperature performance, holding firmly under heat strain
  • Excellent paint line
Adhesive Tape Applications
  • Paint Masking
  • Hold to and clean removal from specialty surfaces such as stainless steel, Anodized aluminum, Phospate primer, Chemlease primer, Nickel plating, EPDM rubber & most powder coated paints
Adhesive Tape Markets Served
  • Automotive
  • Truck and trailer body
  • Industrial
Adhesive Tape Colors
  • Tan
Comparable products
Backing Adhesive Thickness Adhesion
 Crepe Paper   Rubber   7.60mil   32.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).