Budnick Converting ®
3M
213
High-Temperature Masking Tape
3M masking tape 213 is a 6.1 mil, smooth, crepe paper treated with a high heat and solvent resistant saturant with a firm rubber adhesive formulated for maximum transfer resistance and high holding power. It is a high-temperature resistant tape for use in masking and holding applications where temperatures reach 350°F up to one hour. 213 has a firm and transfer-resistant adhesive and does not anchor itself as softer adhesives often do. It is ideal for use on aluminum anodized surfaces. 213 should not be subjected to outdoor exposure or prolonged periods of sunlight. It may become very difficult to remove.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.1 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 9.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 36 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp |
Product Features
- Excellent high-temperature holding
- Adhesive transfer resistance
- Conformable
- Easy tear
- Solvent & moisture resistant
- Controlled unwind
- Very good paint line
Adhesive Tape Applications
- When treated metals, such as aluminum, are used
- When bake cycles exceed one hour at 300°F
- When a moderate tack tape is desired
- SUITABLE FOR:
- Stainless steel
- Anodized aluminum
- EPDM rubber
- Most powder coated paints
Adhesive Tape Colors
- Tan
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.