SearchProducts (340 Results)
Showing 340 of 340 results
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
V742 is a 1/16" thick, 9#, closed cell PVC, with an acrylic adhesive on one side. It is a multi-purpose, medium density foam that is ideal for light, air, and moisture seals. Norseal® V740 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V744 is a 1/8" thick, 9#, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Norseal® V740 series has been specially formulated to provide superior performance with a reduced density foam.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V748 is a 1/4" thick, 9#, closed cell Polyvinyl Chloride (PVC) foam sealant, with an acrylic adhesive on one side. It was designed to provide an economical solution to seal against light, air, and moisture. Norseal® V740 series has been specially formulated to provide superior performance with a reduced density foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 32 Mils |
Adhesion | |
tesa® 64956 is a 32 mil, double sided polyethylene foam tape. The foam is coated with a permanent synthetic rubber adhesive. 64956 is used for indoor applications like construction of P.O.S. displays, mounting of signs and posters, mounting of shelf edge labeling systems, and damping and fixation of components and panels. Due to the high foam conformability, it has an immediate bond, even on rough surfaces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 45 Mils |
Adhesion | |
V2845H is a 45 mil thick, closed cell polyurethane on a high density poly liner. V2845 is the same product on a medium density poly liner.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 30 Mils |
Adhesion | |
V2030 is a 30 mil thick, double coated polyurethane foam. Its high density creates a durable, all-weather foam mounting tape for skylights, HVAC gasketing & glass lamination.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 36 Mils |
Adhesion | |
FM 2132 is a 1/32", double coated polyethylene foam. It is primarily used for bonding to a wide range of wood, metal and plastic substrates where foam thickness is required. Specification #2132
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 35.65 Mils |
Adhesion | |
1232 is a 1/32” thick white closed, crosslinked polyethylene foam coated on both sides with a high performance rubber based adhesive with a white kraft liner. It has a synthetic rubber based adhesive which provides superior performance in applications requiring an aggressive high tack/high shear pressure sensitive foam tape. It is primarily used for indoor general purpose mounting applications.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
1016 is a 1/16 inch double coated 4# density white polyethylene foam. It uses a synthetic rubber based adhesive, which provides superior performance in applications requiring an aggressive high tack/high shear pressure sensitive foam tape.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 22 Mils |
Adhesion | |
62932 is a 19.7 mil, polyethylene foam tape used for bonding materials with differing thermal elongation. It can be used to adhere decorative aluminium cover screens on brown goods, doorhandles in kitchen furniture, and molded decorative profiles for refrigerators or freezers, etc.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31.5 Mils |
Adhesion | |
62934 is a 32 mil, polyethylene foam tape used to mount decorative profiles for fridges or freezers.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 62.99 Mils |
Adhesion | |
62936 is a 63 mil permanent bond, double-sided foam tape with acrylic adhesive and a closed cell PE foam backing.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 32 Mils |
Adhesion | |
Banner Ups by Budnick TigerMount 032 Double Sided White Foam Mounting Tape is a 32 mil, double sided polyethylene foam tape. The foam is coated with a permanent synthetic rubber adhesive. It is used for indoor applications like construction of P.O.S. displays, mounting of signs and posters, mounting of shelf edge labeling systems, and damping and fixation of components and panels. Due to the high foam conformability, it has an immediate bond, even on rough surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
Banner Ups by Budnick TigerMount 060 White Foam Tape a 1/16 inch double coated 4# density white polyethylene foam. It uses a synthetic rubber based adhesive, which provides superior performance in applications requiring an aggressive high tack/high shear pressure sensitive foam tape.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 22 Mils |
Adhesion | |
Banner Ups by Budnick TigerMount Pro Double Sided black PE Foam Tape is a 22 mil, polyethylene foam tape used for bonding materials with differing thermal elongation. It can be used for more demanding POP displays and to mount letters or attach sign components. It is also used to adhere decorative aluminum cover screens on brown goods, door handles in kitchen furniture, and molded decorative profiles for refrigerators or freezers, etc.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31.5 Mils |
Adhesion | |
Banner Ups by Budnick TigerMount 031 double sided black polyethylene foam tape is a highly conformable and has a modified acrylic adhesive for permanent bonding applications. It can be used for more demanding POP displays and to mount letters, LED lights, or attach sign components. It is also used to adhere decorative aluminum cover screens on brown goods, door handles in kitchen furniture, and molded decorative profiles for refrigerators or freezers, etc.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 39 Mils |
Adhesion | |
tesa® FlameXtinct45001 product is a flame retardant PE-foam tape for permanent mounting in demanding applications. The tape comprises of a flame retardant acrylic adhesive and flame retardant PE-foam with excellent bonding strength.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 35.65 Mils |
Adhesion | |
2232 is a 1/32” thick white closed, crosslinked polyethylene foam coated on both sides with a high performance rubber based adhesive with a blue poly liner. It has a synthetic rubber based adhesive which provides superior performance in applications requiring an aggressive high tack/high shear pressure sensitive foam tape. It is primarily used for indoor general purpose mounting applications.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 60 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-1006LM Density: 10 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 125 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-2012 Density: 20 lb/ft3
Backing/Carrier | |
---|---|
Adhesive | |
Thickness | 250 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-1012LM Density: 10 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 60 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-1506 Density: 15 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 125 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-1512 Density: 15 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 250 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-1525 Density: 15 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 250 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-2025 Density: 20 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 125 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-2012 Density: 20 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 60 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-2006 Density: 20 lb/ft3
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 60 Mils |
Adhesion | oz/in |
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-2506 Density: 25 lb/ft3
Backing/Carrier | EPDM - Ethylene Propylene Diene Monomer |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
The semi-closed cell structure of EPT-Sealer EE-1040 combines the flexibility of open cell types with the excellent sealing capabilities of closed cell types (after compression). This unique foam is laminated with a butyl-based double-coated adhesive tape to seal lower surface energy substrates like (complex) gaps against water, wind, dust, noise and heat.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 43.3 Mils |
Adhesion | |
tesa® ACXplus 77811 is a double-sided acrylic foam tape for mounting of automotive exterior attachment parts. It is a triple-layer symmetrically designed product, coated on both sides with LSE adhesive.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 43.3 Mils |
Adhesion | |
tesa® ACXplus 77711 is a 1.1 mm acrylic foam tape with a unique double-layer asymmetrically designed product, coated on one side with LSE adhesive. It can help eliminate the primer in the process.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 43.3 Mils |
Adhesion | |
tesa® ACXplus 77611 is a 43mil double-sided acrylic foam tape with a unique double layer product design, coated with low surface energy (LSE) adhesive on the covered side. Its high-performance LSE adhesive has excellent initial adhesive properties when it comes to different types of OEM clearcoats and can reach near ultimate performance right after being applied. tesa® ACXplus 77611 is a 43mil double-sided acrylic foam tape for mounting of automotive exterior parts
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Proprietary |
Thickness | 31.5 Mils |
Adhesion | |
tesa® 92108 HiP – High initial Performance is a 0.8 mm double-sided foam tape for LSE surfaces: plastic to plastic application in automotive interior
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Proprietary |
Thickness | 20 Mils |
Adhesion | |
tesa® 92105 HiP – High initial Performance is a 20 mil, double-sided foam tape for LSE surfaces: plastic to plastic application in automotive interior
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Proprietary |
Thickness | 43.3 Mils |
Adhesion | |
tesa® 92111 HiP – High initial Performance is a 43.3 mil, double-sided foam tape for LSE surfaces: plastic to plastic application in automotive interior
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 44.9 Mils |
Adhesion | oz/in |
3M™ Acrylic Plus Tape EX4311 features an acrylic adhesive formulated for bonding to advanced clear coat systems including carbamates. The non-liner side features a different adhesive for a range of paint and LSE surfaces. The 1.14 mm viscoelastic foam core provides stress relaxation when exposed to high application loads, and maintains tight bond-line aesthetics under normal conditions.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 45 Mils |
Adhesion | |
3M™ VHB™ Tape LSE-110WF is a 45 mil white, conformable, double sided acrylic foam tape with a high initial tack and a soft foam. Its design enables bonding of many low surface energy substrates/materials without primer. 3M VHB Tape LSE is a white tape available in three different thicknesses with a 3M branded red siliconised polyethylene film liner.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 8 Mils |
Adhesion | |
tesa 62622 is a black double sided thin foam tape. The tape is equipped with a tackified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 7.87 Mils |
Adhesion | |
tesa 62624 is an 8mil black double sided thin foam tape. The tape is equipped with a tackified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 9.84 Mils |
Adhesion | |
tesa 6265 is a black double sided thin foam tape. The tape is equipped with a tackified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 39.37 Mils |
Adhesion | |
tesa 62510 is a double-sided PE-foam tape for mounting applications. It consists of a highly conformable PE-foam backing coated with a tackified acrylic adhesive
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 47.24 Mils |
Adhesion | |
tesa 62512 is a double-sided PE foam tape for mounting applications. It consists of a highly conformable PE-foam backing coated with a tackified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 19.69 Mils |
Adhesion | oz/in |
tesa 62505 is a double sided PE foam tape for lightweight mounting applications. It consists of a highly conformable PE foam backing and a tackified acrylic adhesive
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 43 Mils |
Adhesion | |
4952 is a 43 mil double coated foam tape with a high humidity resistance, used primarily to mount mirrors on cars and rough surfaces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Rubber |
Thickness | 45 Mils |
Adhesion | oz/in |
3M4085 is a 3/64" double coated urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 66.8 Mils |
Adhesion | |
2116 is a 1/16th inch thick white PE foam double coated with a rubber based adhesive. It is primarily used for mounting to surfaces requiring conformability, cushioning and a high degree of adhesive performance.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
V1362 is a .0625" thick, double coated, polyurethane foam used primarily to dissipate vibrations and distribute stress forces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 30 Mils |
Adhesion | |
V2830 is a .03" thick, closed cell polyurethane that is double coated with an acrylic adhesive. This is primarily used for dissipation of vibrations and distribution of stresses.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 129.8 Mils |
Adhesion | |
2108 is 1/8" thick white Polyethylene foam double coated with a rubber adhesive. It is primarily used for mounting to surfaces requiring conformability, cushioning and a high degree of adhesive performance.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 35.8 Mils |
Adhesion | |
FM 2333 is a 1/32", white, cross linked polyethylene foam coated two sides with a high tack acrylic adhesive for mounting applications. It is primarily used for general purpose mounting. Specification # 56078.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 66.7 Mils |
Adhesion | |
FM 2316 is a 1/16th inch thick white cross linked polyethylene foam coated two sides. It is primarily used for general purpose mounting applications. Specification # 56078.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 625 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 750 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 80 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
LC Series products are excellent alternatives to low permeability urethane where long product life is critical. This foam is excellent for use in applications requiring a low force to compress.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 33.8 Mils |
Adhesion | |
FM2454 is a 33.8 mil, cross linked black polyethylene foam designed for bonding automotive mirrors to mirror housings. An aggressive acrylic double coated foam used where good adhesion, heat resistance, environmental resistance gap filling and shatter resistance are important.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Foam Seal Aluma-Seal 723 is an industrial medium density PVC foam product cast on an aluminum liner. AlumaSeal 723 is a PVC foam with an aluminum covering on one side and acrylic adhesive on the other side. Product is UL listed from 1/16" to 1/4" thickness with an acrylic PSA.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Foam Seal Aluma-Seal is an industrial medium density PVC foam product cast on an aluminum liner. AlumaSeal is a PVC foam with an aluminum covering on one side and acrylic adhesive on the other side. It is often used in the appliance and HVAC industries to shield cool compartments from heat sources to prevent condensation and reduce noise in refrigeration products. It is available in a few foam thicknesses from 1/16 to 1/4".
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Foam Seal 70P UL is a low density industrial PVC foam tape formulated to conform to UL HF-1/HBF* and is a recognized component of Underwriters Laboratories. It has an acrylic adhesive and is used for general air, dust, and moisture seal gasketing and sound damping.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | |
Thickness | |
Adhesion | |
60MG Medical Grade Foam is an economical, closed cell foam that can be used for applications requiring a seal for tight radius curves. 60MG has been independently tested and certified to comply with the ISO 10993-10 protocol for direct skin contact. This low density PVC foam remains pliable at temperatures of -20°C to 78°C (-4°F to 172°F).
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 34 Mils |
Adhesion | |
ARclad® IS-6262-72 is an acrylic double-coated foam tape, ideal for dissimilar and irregular surfaces, applicable for indoor and outdoor.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 66 Mils |
Adhesion | |
IM2940 is a 1/16 inch white, closed cell, polyethylene foam coated on both sides with a high performance, modified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
1016 is a 1/16in single coated white polyethylene foam.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
V710.375 is a 3/8" thick, light density, closed cell, PVC foam used for sealing.
Backing/Carrier | EPDM - Ethylene Propylene Diene Monomer |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Nitto EE1010 (EPT Sealer) is a pressure-closed-cell foam joint-filling material used to fill gaps found in a variety of structures. EE 1010 can be used as a waterproofing, windbreak, dust-proofing, sound damping or thermal insulating material. EE1010 is laminated with a double coated acrylic adhesive for general purpose use.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 750 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
3016 is a 1/16in double coated, white polyethylene foam with an acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 67.3 Mils |
Adhesion | |
3316 is a 1/16in double coated, black polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
3008 is a 1/8in double coated, white polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
3308 is a 1/8in double coated, black polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 31 Mils |
Adhesion | |
1232-1 is a 1/32in single coated white polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | |
3232-1 is a 32 mil single coated, white polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
3332-1 is a 1/32in single coated, black polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | |
Adhesion | |
1332-1 is a 1/32in single coated black polyethylene foam.
Backing/Carrier | Rubber |
---|---|
Adhesive | Rubber |
Thickness | 45 Mils |
Adhesion | oz/in |
***Discontinued*** 510 is a 45 mil, light green rubber backing with rubber adhseive and easy-release clear film liner. Hand-cut - single liner format.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 93.75 Mils |
Adhesion | |
200A.093 is a 3/32 inch, closed cell silicone sponge with an acrylic pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 94 Mils |
Adhesion | oz/in |
K20.094 is a 94 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
K20.375 is a 375 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | oz/in |
K20.500 is a 500 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 63 Mils |
Adhesion | oz/in |
K40.062 is a 62 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 250 Mils |
Adhesion | oz/in |
4014 is a 250 mil, open cell polyurethane foam tape, primarily used for plastic or metal contact with materials that can result in potentially damaging vibration.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 35 Mils |
Adhesion | oz/in |
K30.035M is a 35 mil, polyurethane foam with mylar used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 40 Mils |
Adhesion | oz/in |
K30.040M is a 40 mil, polyurethane foam with mylar used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 45 Mils |
Adhesion | oz/in |
K30.045M is a 45 mil, polyurethane foam with mylar used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 63 Mils |
Adhesion | oz/in |
K30.063M is a 63 mil, polyurethane foam with mylar used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
K30.125 is a 125 mil, polyurethane foam used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
K30.188 is a 188 mil, polyurethane foam used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
K30.250 is a 250 mil, polyurethane foam used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
K30.375 is a 375 mil, polyurethane foam used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | oz/in |
K30.500 is a 500 mil, polyurethane foam used in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 94 Mils |
Adhesion | oz/in |
K40.094 is a 94 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
K40.125 is a 125 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
K40.188 is a 188 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
K40.250 is a 250 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 20 Mils |
Adhesion | oz/in |
K40.020 is a 20 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 30 Mils |
Adhesion | oz/in |
K40.030 is a 30 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 15 Mils |
Adhesion | oz/in |
K40.015 is a 15 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 12 Mils |
Adhesion | oz/in |
K40.012 is a 12 mil, polyurethane foam use in cellular phones and electrical enclosures.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 31 Mils |
Adhesion | |
1332 is a 1/32in double coated, 6# density, black, polyethylene foam used in the point of purchase display industry.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
V1510.188 is a 3/16" thick, medium density, closed cell, PVC foam. Ideal for long life seals against air, moisture, light and dust penetration.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
V1510.25 is a 1/4" thick, medium density, closed cell, PVC foam. Ideal for long life seals against air, moisture, light and dust penetration.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
V1526SA.125 is a 1/8" thick, double coated, polyvinyl foam used for sealing against air, moisture, light and dust.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 94 Mils |
Adhesion | oz/in |
V1526SA.094 is a 3/32" thick medium density, double coated, Polyvinyl Chloride foam used for sealing against air, moisture, light, and dust penetration.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 36.45 Mils |
Adhesion | |
IM1800 is a 1/32", white, closed cell, 6# polyethylene foam with a rubber adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 32 Mils |
Adhesion | oz/in |
6141 is a 32mil, 6 lb. density, white, closed cell, cross linked polyethylene foam coated on both sides with the same high performance synthetic rubber adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 32 Mils |
Adhesion | oz/in |
6181 is a 32mil, 6lb. Density white closed cell, cross linked polyethylene foam coated on both sides with the same synthetic rubber adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | oz/in |
4481 is a 32mil, 6lb. Density white closed cell, cross linked polyethylene foam coated on both sides with the same synthetic rubber adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | oz/in |
4281 is a 62mil, 4lb. Density white closed cell, cross linked polyethylene foam coated on both sides with the same synthetic rubber adhesive.
Backing/Carrier | PTFE - Skived |
---|---|
Adhesive | |
Thickness | |
Adhesion | |
950 is a laminate of 5 mil, PTFE film and a 50 mil polyethylene foam used as a lining for the cap and closure market.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
1316-1 is a 1/16in single coated, black polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
3316-1 is a 1/16in single coated, black polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
3016-1 is a 1/16in single coated, white polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | |
1008-1 is a 1/8in single coated, white polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
3008-1 is a 1/8in single coated, white polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | |
1308-1 is a 1/8in single coated, black polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
3308-1 is a 1/8in single coated, black polyethylene foam with a acrylic adhesive.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
V1510.125 is a 1/8" thick, medium density, closed cell, PVC foam. Ideal for long life seals against air, moisture, light and dust penetration.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 71 Mils |
Adhesion | |
IM1930 is a 71 mil, general purpose bonding and mounting foam tape.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 34 Mils |
Adhesion | |
IM1900 consists of a 1/32 inch white, closed cell polyethylene foam coated on both sides with an aggressive, general purpose rubber based adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 36 Mils |
Adhesion | |
IM2908 is a 36 mil, or 1/32" black, closed cell polethylene foam coated on both sides with a high performance, modified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 36 Mils |
Adhesion | |
IM2920 is a 36 mil, double coated, white polyethylene foam for joining uneven surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
1316 is a 1/16in double coated, black polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | |
1008 is a 1/8in double coated, white polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | |
1308 is a 1/8in double coated, black polyethylene foam.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | |
3232 is a 1/32in double coated, white polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | |
3332 is a 1/32in double coated, black polyethylene foam with a acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 40 Mils |
Adhesion | |
64958 is a 40 mil, white double coated pressure sensitive tape with a PE foam backing and a synthetic rubber adhesive. 64958 is used for applications like construction of P.O.S. displays, mounting of signs and posters, mounting of shelf edge labeling systems, and damping and fixation of components and panels
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 20 Mils |
Adhesion | oz/in |
62872 is a 20 mil, polyethylene foam tape that offers excellent long term adhesive performance for demanding constuctive applications like permanent mounting of emblems.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Silicone |
Thickness | 31.3 Mils |
Adhesion | |
440S is a 1/32 inch, 30 durameter, solid silicone rubber with an silicone adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 110 Mils |
Adhesion | oz/in |
IT100 is a 110 mil, polyethylene foam tape used for covering cold pipes.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V310 series is a very low density, grey PVC foam sealant available with acrylic pressure sensitive adhesion on one side for light duty sealing for weathering applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V310 series is a very low density, grey PVC foam sealant available with acrylic pressure sensitive adhesion on one side for light duty sealing for weathering applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V310 series is a very low density, grey PVC foam sealant available with acrylic pressure sensitive adhesion on one side for light duty sealing for weathering applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V310 series is a very low density, grey PVC foam sealant available with acrylic pressure sensitive adhesion on one side for light duty sealing for weathering applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | |
V310 series is a very low density, grey PVC foam sealant available with acrylic pressure sensitive adhesion on one side for light duty sealing for weathering applications.
Backing/Carrier | Rubber |
---|---|
Adhesive | Acrylic |
Thickness | 85 Mils |
Adhesion | |
BT100R is a high quality, durable rubber coated with an advanced water based acrylic adhesive. This product was designed for PMB up to 100 psi.
Backing/Carrier | Rubber |
---|---|
Adhesive | |
Thickness | 35 Mils |
Adhesion | |
BT-146 is a high quality/durable rubber, that is coated with an advanced high tack water based acrylic adhesive. BT-146 is designed for die-cut masking in PMB or other shot-peen processes.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 43.3 Mils |
Adhesion | |
4957 is a 43.3 mil double-sided tape consisting of a very conformable closed cell PE-foam backing and a modified acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 36 Mils |
Adhesion | |
M1763 is a .031" thick PE foam coated two sides with Mactac's MP555 rubber adhesive. Which is a unique formula that brings the typical benefits of a rubber PSA such as high-tack and peel properties and great performance on low surface energy substrates with no trade-offs in shear strength and creep resistance
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 68 Mils |
Adhesion | |
M1863 is a .063" thick PE foam coated two sides with Mactac's MP555 rubber adhesive. Which is a unique formula that brings the typical benefits of a rubber PSA such as high-tack and peel properties and great performance on low surface energy substrates with no trade-offs in shear strength and creep resistance
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Proprietary |
Thickness | 14.99 Mils |
Adhesion | oz/in |
3M™ Acrylic Foam Tape 4257 is a 0.38 mm (0.015 in) thick, gray, double coated acrylic foam tape used in a variety of automotive applications where bonding surfaces are well matched or where the parts to be bonded are thin and flexible.
Backing/Carrier | |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
tesa® 65610 Removable is a double-sided PE foam tape equipped with a PET reinforcement film. It consists of a tackified acrylic adhesive with a well-balanced performance on a wide variety of surfaces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | |
BCI26-75127 is a flexible open cell foam tape, single side coated with high-tack, permanent, rubber-based, pressure-sensitive adhesive.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Rubber |
Thickness | 375 Mils |
Adhesion | |
BCI26-75377 is a .375 inch thick, flexible open cell foam tape. It is single coated with high-tack, permanent, rubber-based, pressure-sensitive adhesive. This tape exhibits a superior balance of tack, peel, and holding power on a wide variety of surfaces. BCI26-75127 is cost-effective, resists water and moisture, has very good air permeability, and remains flexible over a long period of demanding usage.
Backing/Carrier | Nitrile |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
BCI26-76127's uniform, closed cell structure resists the absorption of water and other fluids. Its high-performance, permanent acrylic adhesive bond is ideal for sealing, gasketing, weatherproofing, thermal insulating, absorbing shock, and dampening vibration.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 5.42 Mils |
Adhesion | |
Vancive MED 5641 is a single-coated, soft, thick, elastic, tan PVC foam with an acrylic adhesive. This product's cushioning foam and elasticity provide for end-user comfort. Vancive is a division of Avery Dennison
Backing/Carrier | |
---|---|
Adhesive | Acrylic |
Thickness | 118 Mils |
Adhesion | |
tesa® ACXplus 75530 is a double-sided transparent acrylic core tape. It consists of a high-performance acrylic system and is primarily characterised by its Bonding Power, Stress Dissipation and its Temperature and Weather Resistance. Due to the high transparency it is especially suitable for constructive bonding of transparent and translucent materials such as glass or acrylic. The visco-elastic, solid acrylic core compensates different thermal elongation of bonded parts.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 21.6 Mils |
Adhesion | |
tesa® ACXplus 7042 is an acrylic foam tape, available in gray or white. It consists of a high performance acrylic system and is primarily characterized by its bonding power, stress dissipation characteristics, and its temperature and weather resistance. Due to the product's unique formulation, this double-sided acrylic foam tape combines very high adhesion levels with the ability to absorb and dissipate high dynamic loads. tesa® ACXplus 7042 performs well on "hard-to-bond-materials" such as powder coatings or plastic materials. Even in combinations of such materials, this product provides advanced safety due to its innovative product design. tesa® ACXplus 7042 is especially designed to allow invisible bonding of decorative elements. The gray or white color options adapt very well to metal and plastic surfaces. Furthermore, gleaming of translucent and decorative materials is avoided.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 63 Mils |
Adhesion | |
tesa® 64962 is a 63mil white PE foam coated on both sides with a synthetic rubber based adhesive. It has an immediate bond even on rough surfaces due to the high conformability of the soft PE foam, high bonding strength at low mounting pressure, high bonding strength on low surface energy substrates.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 27.55 Mils |
Adhesion | |
Saint-Gobain Norbond® A7500 series is a dark, acrylic core tape designed with black edge profile, with outstanding viscoelastic and adhesion properties. It is designed for ideal bonding on many interior and exterior industrial applications where a dark aesthetic is required. A7500 is formulated for durable, long-lasting adhesion to high surface energy substrates.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 63 Mils |
Adhesion | |
Saint-Gobain Norbond® A7500 series is a dark, acrylic core tape designed with black edge profile, with outstanding viscoelastic and adhesion properties. It is designed for ideal bonding on many interior and exterior industrial applications where a dark aesthetic is required. A7500 is formulated for durable, long-lasting adhesion to high surface energy substrates.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
Saint-Gobain NORSEAL® R10470 silicone sponge rubber is a specification grade closed-cell silicone sponge that can be used in most gasketing applications. This material is flexible and compressible and designed for use in extreme temperature ranges, with excellent weatherability, compression set resistance, electrical strength and non-stick properties.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
Saint-Gobain NorSeal® r10480M silicone sponge rubber is a low compression set closed-cell sponge that can be used in most gasketing applications. This material is flexible and compressible and designed for use in extreme temperature ranges, with excellent weatherability, compression set resistance, electrical strength and non-stick properties.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 31.4 Mils |
Adhesion | oz/in |
Saint-Gobain NORSEAL® F-12 silicone foam combines unique flame retardancy and low toxic gas emission properties with excellent compression set resistance, conformity and low density. Combining two or all of these properties makes F-12 the ultimate fireblocking silicone foam for fire- and heat-resistant gaskets, seals and cushioning, as well as radiant heat shields and insulation blankets.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | |
Thickness | 5.9 Mils |
Adhesion | |
3M™ Stretch Release Tape 6657-150 is a double coated tape with a specially designed adhesive and carrier which can be stretched in the parallel or up to perpendicular (180°-90°)direction of the bond plane for easy removal without adhesive residue. This product maintains good adhesion and vibration resistance to a variety of surfaces.
Backing/Carrier | Rubber |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
40 durometer commercial grade solid silicone rubber - No Adhesive
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Proprietary |
Thickness | |
Adhesion | oz/in |
Ludlow’s HD Glass Pad is a proprietary, high-density PVC foam composite that provides both rigid support and the ability to bond to non-porous surfaces with cling properties.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | oz/in |
V2510.031 is a 31 mil PVC, closed cell foam designed for the most demanding sealing or cushioning against air, moisture, light and dust penetration.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | |
Thickness | 750 Mils |
Adhesion | oz/in |
V700.75 is a 3/4" thick, light density, closed cell, PVC foam used for sealing. No adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 133 Mils |
Adhesion | oz/in |
IM1940 is an 1/8" white closed cell polyethylene foam coated on both sides with an aggressive, general purpose, rubber based adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31.5 Mils |
Adhesion | |
62854 is a 31.5 mil double-coated tape consisting of a PE foam backing and a pure acrylic adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 35.4 Mils |
Adhesion | |
62855 is a 35.4 mil double-coated tape consisting of a PE foam backing and a pure acrylic adhesive.
Backing/Carrier | Rubber |
---|---|
Adhesive | |
Thickness | |
Adhesion | |
D-Max - HVOF/Plasma Tape is Dewal's only one-step masking tape that will provide the ultimate protection during the destructive spray process of HVOF. This product has a proprietary rubber backing.
Backing/Carrier | Proprietary |
---|---|
Adhesive | Acrylic |
Thickness | 78.7 Mils |
Adhesion | |
4412N is a lonomer backed foamed acrylic that has extremely tacky and environmental resistant acrylic adhesive on one side. It is 2 mm (78.7 mils) thick and is used for extreme sealing applications such as: parapet walls, trailer home roofs, metal buildings, vent stacks and vent windows, gutters & down spouts, sky lights, patching, trailer & RV roofs and metal enclosures.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | oz/in |
Gaska F710 is a .25 inch thick, white, UL rated PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PET - Polyester |
---|---|
Adhesive | Rubber |
Thickness | 35.6 Mils |
Adhesion | |
CCT PRFT1700-7660 is a double coated, 1/32" white EO foam tape with polyester support. Polyester support is welded to XLPE to enhance dimensional stability and to offer enhanced ease of removal. Removable rubber based adhesive on the liner side and a high temperature resistant, good shear adhesive on the laminating side.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 35.3 Mils |
Adhesion | |
FT1800 is a 1/32" white polyethylene foam coated on both sides with a high tack rubber based adhesive system. The product displays excellent cold temperature properties and offers a foam tearing bond to a wide variety of materials.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 68 Mils |
Adhesion | |
IM1830A consists of 1/16" white, closed-cell, polyethylene foam coated both sides with high-shear rubber-based pressure sensitive adhesive. The adhesives are protected by a C2S 80# semi-bleached, densified kraft release liner.
Backing/Carrier | EVA - Ethylene Vinyl Acetate |
---|---|
Adhesive | Acrylic |
Thickness | 67 Mils |
Adhesion | |
GP210-.063 is a cost-effective, double-coated mounting tape that combines excellent bond strength and durability in interior applications. It is designed as a cost-effective, medium-duty mounting tape.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 20 Mils |
Adhesion | |
Saint-Gobain NORBOND® A7300-20 is a grey, 20 mil double-sided, coated acrylic foam tape with outstanding viscoelastic and adhesion properties. It offers ideal bonding performance for many interior and exterior industrial applications. Formulated for durable, long-lasting adhesion, A7300 exceeds industry standards for shear strength and bonding to high surface energy substrates, even at elevated temperatures.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 66.5 Mils |
Adhesion | oz/in |
FT 1802 is double coated foam with a high tack rubber based adhesive system.
Backing/Carrier | Polyolefin |
---|---|
Adhesive | Acrylic |
Thickness | 23 Mils |
Adhesion | |
Nitto 5790 series are double coated foam tapes, based on a cross linked polyolefine foam, coated with pressure sensitive adhesive, having excellent bonding properties, especially on low energy surfaces.
Backing/Carrier | Polyolefin |
---|---|
Adhesive | Acrylic |
Thickness | 35 Mils |
Adhesion | oz/in |
Nitto 5790-35 is a 35mil double coated foam tape, based on a cross linked polyolefine foam, coated with pressure sensitive adhesive, having excellent bonding properties, especially on low energy surfaces.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 31.5 Mils |
Adhesion | |
Saint-Gobain NORBOND® A7300-31.5 is a grey, double-sided, coated acrylic foam tape with outstanding viscoelastic and adhesion properties. It offers ideal bonding performance for many interior and exterior industrial applications. Formulated for durable, long-lasting adhesion, A7300 exceeds industry standards for shear strength and bonding to high surface energy substrates, even at elevated temperatures.
Backing/Carrier | |
---|---|
Adhesive | Acrylic |
Thickness | 43 Mils |
Adhesion | |
Saint-Gobain NORBOND® A7300-43 is a grey 43 mil, double-sided, coated acrylic foam tape with outstanding viscoelastic and adhesion properties. It offers ideal bonding performance for many interior and exterior industrial applications. Formulated for durable, long-lasting adhesion, A7300 exceeds industry standards for shear strength and bonding to high surface energy substrates, even at elevated temperatures.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 66.1 Mils |
Adhesion | oz/in |
Ft1922 is a .062 mil. double coated white foam coated on both sides with 1.8 mils of high tack acrylic adhesive. It is typically used for permanent general purpose mounting, name plate attachment, POP displays, mirror housing attachment, and appliance and automotive mounting.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
Normount V1362 is a 1/16" thick, white PU foam primarily used for mirror, trim, display and appliance mounting.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | oz/in |
4026 is a 1/16" thick open cell urethane foam. Urethane foams are generally ideal for bonding in interior applications or exterior where the tape will be protected from the environment.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | oz/in |
A 62.50 mil. vinyl foam tape featuring 430 acrylic adhesive on a thick silicone liner used for many sealing applications. The 4500 series helps seal out dust, light and moisture when placed under 30% compression. The vinyl family offers excellent aging characteristics and will remain flexible when exposed to elevated temperatures and UV light.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | |
V762 is a 1/16" thick, firm, single coated, high density foam, ideal for diecutting, vibration dampening and metal to metal sealing.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 32 Mils |
Adhesion | |
51930 is a double coated polyurethane foam tape, 32 mils thick, used for bonding tractor trailer roof panels, indoor and outdoor signs.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 63 Mils |
Adhesion | oz/in |
V992 is a 63 mil thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
V994 is a 1/8" thick, 15#, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | oz/in |
V996 is a 3/16" thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
V998 is a 1/4" thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
3M4004 is a 1/4" double coated urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
3M4008 is a 1/8" double coated urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | oz/in |
3M4016 is a 1/16" double coated urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | oz/in |
3M4032 is a 1/32" double coated urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | oz/in |
3M4052 is a 1/32" double coated black urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | oz/in |
3M4056 is a 1/16" double coated black urethane foam tape ideal for general purpose lightweight mounting and joining.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V824 is a 1/8" thick , 6#, closed cell Polyvinylchloride (PVC), with an acrylic adhesive system on one side. Primarily used for light, air, and moisture seals in a variety of applications. Norseal® V820 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V734 is a 1/8" thick, 6#, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals. Norseal® V730 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V736 is a 3/16" closed cell PVC ideal for light, dust, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V738 is a 1/4" closed cell PVC ideal for light, dust, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V7312 is a 3/8" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | |
V7316 is a 1/2" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 625 Mils |
Adhesion | |
V7320 is a 5/8" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 750 Mils |
Adhesion | |
V7320 is a 3/4" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, dust, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V746 is a 3/16" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, air, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V7412 is a 3/8" thick, closed cell Polyvinyl Chloride (PVC), with an acrylic adhesive on one side. This is a multipurpose foam that's primarily used for light, air, and moisture seals.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 93.8 Mils |
Adhesion | |
V763 is a 3/32" thick, firm high density 15# PVC foam, ideal for diecutting, vibration dampening and metal to metal sealing. Its high internal strength provides good abrasion resistance. Norseal® V760 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V764 is a 1/8" thick, firm high density 15# PVC foam, ideal for die cutting, vibration dampening and metal to metal sealing. Its high internal strength provides good abrasion resistance. Norseal® V760 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V766 is a .1875" thick, firm, high density foam, ideal for diecutting, vibration dampening and metal to metal sealing.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V768 is a 1/4" thick, firm, high density foam, ideal for diecutting, vibration dampening and metal to metal sealing.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 30 Mils |
Adhesion | |
V1330 is a .030" thick, double coated, polyurethane foam used primarily to dissipate vibrations and distribute stress forces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | |
V2862 is a 62 mil thick, closed cell polyurethane that is double coated with an acrylic adhesive. This is primarily used for dissipation of vibrations and distribution of stresses.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187 Mils |
Adhesion | |
V826 is a 3/16" thick, closed cell Polyvinylcloride (PVC), with an acrylic adhesive system on one side.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
V828 is a 1/4" thick , 6#, closed cell Polyvinylchloride (PVC), with an acrylic adhesive system on one side. Primarily used for light, air, and moisture seals in a variety of applications. Norseal® 820 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V8212 is a 3/8" thick , 6#, closed cell Polyvinylchloride (PVC), with an acrylic adhesive system on one side. Norseal® V820 series. Primarily used for light, air, and moisture seals in a variety of applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | |
V8216 is a 1/2" thick , 6#, closed cell Polyvinylchloride (PVC), with an acrylic adhesive system on one side. Primarily used for light, air, and moisture seals in a variety of applications. Norseal® V820 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V774 is a 1/8" thick, single coated, closed cell, PVC, low density foam primarily used to seal thin gauge metals & plastics.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V776 is a 3/16" thick, single coated, closed cell, PVC, low density foam primarily used to seal thin gauge metals & plastics.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V778 is a 1/4" thick, single coated, closed cell, PVC, low density foam primarily used to seal thin gauge metals & plastics.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V7712 is a 3/8" thick, single coated, closed cell, PVC, low density foam primarily used to seal thin gauge metals & plastics.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | |
V7716 is a 1/2" thick, single coated, closed cell, PVC, low density foam primarily used to seal thin gauge metals & plastics.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
V782 is a 1/16" thick, single coated, 9#, closed cell PVC foam. This medium density foam meets FMVSS302 flammability standard. Norseal® V780 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V784 is a 1/8" thick, single coated, 9#, closed cell PVC foam. This medium density foam meets FMVSS302 flammability standard. Norseal® V780 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V786 is a 3/16" thick, single coated, closed cell PVC foam. This medium density foam meets FMVSS302 flammability standard.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V788 is a 1/4" thick, single coated, closed cell PVC foam. This medium density foam meets FMVSS302 flammability standard.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V7812 is a 3/8" thick, single coated, closed cell PVC foam. This medium density foam meets FMVSS302 flammability standard.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V7912 is .375" thick Polyurethane foam specifically developed for log home gasketing.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | |
V7916 is .5" thick Polyurethane foam specifically developed for log home gasketing.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 31.25 Mils |
Adhesion | oz/in |
V981 is a 1/32" thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | oz/in |
V982 is a 1/16" thick, 15#, closed cell Polyvinyl Chloride with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass. V982 is a good choice to seal out water, dust and light, even in joints with a high degree of movement. Norseal® V980 series.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
V984 is a 1/8" thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | oz/in |
V986 is a 3/16" thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
V988 is a 1/4" thick, closed cell PVC with acrylic on both sides. It is excellent for glazing of joints with high movement such as marine glass.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
V2104 is a .125" thick, high strength, open cell, polyurethane foam adhesive coated 2 sides. It is used for structural glazing and cladding spacer systems for field and shop glazing. Available as single coated & linerless, TBX104.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | oz/in |
V2106 is a .1875" thick, high strength, open cell polyurethane foam adhesive coated 2 sides. It is used for structural glazing and cladding spacer systems for field and shop glazing. Available as single coated & linerless, TBX106.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
V2108 is a .25" thick, high strength, open cell polyurethane foam adhesive coated 2 sides. It is used for structural glazing and cladding spacer systems for field and shop glazing. it is also available coated one side and linerless, TBX108.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 312.5 Mils |
Adhesion | oz/in |
V2110 is a .3125" thick, high strength, open cell polyurethane foam for structural glazing and cladding spacer systems for field and shop glazing. Available coated one or two sides.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
V2112 is a .375" thick, high strength, open cell polyurethane foam for structural glazing and cladding spacer systems for field and shop glazing. Available coated one or two sides.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | oz/in |
V2116 is a .5" thick, high strength, open cell polyurethane foam for structural glazing and cladding spacer systems for field and shop glazing. Available coated one or two sides.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
V2204 is a .125" thick, open cell polyurethane foam glazing that is adhesive coated two sides. It is a structural glazing and cladding spacer system for shop fabrication. It is also available single coated and linerless as, TBX204.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | oz/in |
V2206 is a .1875" thick, open cell polyurethane foam glazing that is adhesive coated two sides. It is a structural glazing and cladding spacer system for shop fabrication. It is also available single coated and linerless as, TBX206.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
V2208 is a .25" thick, open cell polyurethane foam glazing that is adhesive coated two sides. It is a structural glazing and cladding spacer system for shop fabrication. It is also available single coated and linerless as, TBX208.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 312.5 Mils |
Adhesion | oz/in |
V2210 is a .3125" thick, open cell polyurethane foam glazing that is adhesive coated two sides. It is a structural glazing and cladding spacer system for shop fabrication.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
V2212 is a .375" thick, open cell polyurethane foam glazing that is adhesive coated two sides. It is a structural glazing and cladding spacer system for shop fabrication.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
V712 is a 1/16" thick, single coated, closed cell PVC foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V714 is a 1/8" thick, single coated, closed cell PVC foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
V716 is a 6/32" thick, single coated, closed cell PVC foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
V718 is a 1/4" thick, single coated, closed cell PVC foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | |
V7112 is a 12/32" thick, single coated, closed cell polyvinyl chloride foam that has a "swirl free" feature that won't move or twist when penetrated by fasteners.
Backing/Carrier | |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
2A00 is an extruded PVC profile that comes in thickness' ranging from 3/16" to 1/2" . It is used primarily as appliance seals especially refrigerators and in metal building and pre-fabricated constructions. Its profile is round and long roll lengths depend on profile diameter.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 20 Mils |
Adhesion | |
V2020 is a 20 mil thick, double coated polyurethane foam. Its high density creates a durable, all-weather foam mounting tape for skylights, HVAC gasketing & glass lamination.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 45 Mils |
Adhesion | |
V2045 is a 45 mil thick, double coated polyurethane foam. Its high density creates a durable, all-weather foam mounting tape for skylights, HVAC gasketing & glass lamination.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | |
V2062 is a 62 mil thick, double coated polyurethane foam. Its high density creates a durable, all-weather foam mounting tape for skylights, HVAC gasketing & glass lamination.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
V13124 is a 125 mil thick, double coated, polyurethane foam used primarily to dissipate vibrations and distribute stress forces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 30 Mils |
Adhesion | |
V2830H is a 30 mil thick, closed cell polyurethane on a high density poly liner. The same product as V2830 on a medium density poly liner.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 45 Mils |
Adhesion | |
V2845 is a 45 mil thick, closed cell polyurethane on a high density poly liner. V2845H is the same product on a high density "easy release" poly liner
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | |
V2862H is a 62 mil thick, closed cell polyurethane which is primarily used for dissipation of vibrations. It is the same product as V2862 but on a high density poly liner.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 16 Mils |
Adhesion | |
LS7116 is a 16 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS7016 has no adhesive.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 30 Mils |
Adhesion | |
LS7130 is a 30 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | |
LS7162 is a 62 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS7062 has no adhesive.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 94 Mils |
Adhesion | |
LS7194 is a 94 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS7094 has no adhesive.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
LS71125 is a 125 mil, urethane foam recommended for bumpers and footpads for appliances and electronic products. LS70125 has no adhesive.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 140 Mils |
Adhesion | oz/in |
K20.140 is a 140 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 63 Mils |
Adhesion | oz/in |
K20.063 is a 63 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 80 Mils |
Adhesion | oz/in |
K20.080 is a 80 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
K20.125 is a 125 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
K20.188 is a 188 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
K20.250 is a 250 mil, PU foam ideal for a variety of gasketing and energy absorption needs.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | oz/in |
4496 is a double coated PE foam tape which combines a conformable closed cell foam with a high strength acrylic adhesive which provides a good initial tack to a wide variety of surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 188 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
A 250 mil. urethane foam tape, series 4100, featuring A-25 acrylic adhesive on a silicone treated liner used primarily for coding, sealing and identification applications.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 31 Mils |
Adhesion | |
3M 4462 is a 31.0 mil. double coated polyethylene foam tape with rubber adhesive is ideal for many joining, mounting, gasketing, and sealing applications involving irregular surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
3M 4466 is a 62.0 mil. double coated polyethylene foam tape with rubber adhesive is ideal for many joining, mounting, gasketing, and sealing applications involving irregular surfaces.
Backing/Carrier | Rubber |
---|---|
Adhesive | Acrylic |
Thickness | 33 Mils |
Adhesion | |
A specially compounded light green rubber-backed tape with an easy-release liner and transparent acrylic adhesive used for masking and protecting aircraft during dry media blast paint removal.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 31 Mils |
Adhesion | |
A 31.0 mil. double coated polyethylene foam tape with 745 rubber adhesive is ideal for joining, mounting, gasketing and sealing applications involving irregular surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | |
A 62.0 mil. double coated polyethylene foam tape with 745 rubber adhesive is ideal for joining, mounting, gasketing and sealing applications involving irregular surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | |
A 31.0 mil. double coated polyethylene foam tape with 430 acrylic adhesive ideal for joining, mounting, gasketing and sealing applications involving irregular surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | |
A 31.0 mil. double coated polyethylene foam tape with 430 acrylic adhesive is ideal for joining, mounting, gasketing and sealing applications involving irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 500 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
General purpose PVC foam tape manufactured for use in applications requiring positive seals on irregular surfaces.
Backing/Carrier | Acrylic Foam |
---|---|
Adhesive | Acrylic |
Thickness | 31 Mils |
Adhesion | oz/in |
3M 4658F is a 1/32" double coated removable foam tape even though it features high ultimate bond strength. It is used for hanging displays and point of purchase materials that may need to be removed later.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Silicone |
Thickness | 62.5 Mils |
Adhesion | |
100S.063 is a 1/16 inch, closed cell silicone sponge with a silicone pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Silicone |
Thickness | 93.75 Mils |
Adhesion | |
100S.094 is a 3/32 inch, closed cell silicone sponge with a silicone pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Silicone |
Thickness | 125 Mils |
Adhesion | |
100S.125 is a 1/8 inch, closed cell silicone sponge with a silicone pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Silicone |
Thickness | 187.5 Mils |
Adhesion | |
100S.1875 is a 3/16 inch, closed cell silicone sponge with a silicone pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
200A.063 is a 1/16 inch, closed cell silicone sponge with an acrylic pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
200A.125 is a 1/8 inch, closed cell silicone sponge with an acrylic pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
200A.187 is a 3/16 inch, closed cell silicone sponge with an acrylic pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
300AR.063 is a 1/16 inch, reinforced medium compression, closed cell silicone sponge with an acrylic pressure sensitive adhesive.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
300AR.125 is a 1/8 inch, reinforced medium compression, closed cell silicone sponge with an acrylic pressure sensitive adhesive.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
300AR.187 is a 3/16 inch, closed cell silicone sponge with an acrylic pressure sensitive adhesive.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 31.25 Mils |
Adhesion | |
440A.031 is a 1/32 inch, 30 durameter, solid silicone rubber with an acrylic pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 31.25 Mils |
Adhesion | |
400S.031 is a 1/32 inch, 30 durameter, solid silicone rubber with an acrylic pressure sensitive adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | |
512AF.063 is a 1/16 inch, modified cell, silicone fire blocking foam with a film supported acrylic adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 93.75 Mils |
Adhesion | |
512AF.094 is a 3/32 inch, modified cell, silicone fire blocking foam with a film supported acrylic adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | |
512AF.125 is a 1/8 inch, modified cell, silicone fire blocking foam with a film supported acrylic adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
512AF.1875 is a 3/16 inch, modified cell, silicone fire blocking foam with a film supported acrylic adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Siliconized Sponge |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
512AF.25 is a 1/4 inch, modified cell, silicone fire blocking foam with a film supported acrylic adhesive. It offers superior service life, excellent conformability, and flexibility.
Backing/Carrier | Rubber |
---|---|
Adhesive | Acrylic |
Thickness | 85 Mils |
Adhesion | |
An 85.0 mil. rubber backing with acrylic adhesive stripping tape used to provide excellent surface protection during plastic media blast (PMB) paint stripping operations.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
A 125.0 mil. urethane foam tape featuring A-30 acrylic adhesive on a silicone treated liner used for coding, sealing and identification applications.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 62.5 Mils |
Adhesion | oz/in |
A 62.5 mil. urethane foam tape featuring A-25 acrylic adhesive on a silicone treated liner used for coding, sealing and identification applications.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 375 Mils |
Adhesion | oz/in |
A 375.0 mil. urethane tape, series 4310, featuring a A-30 acrylic adhesive on a thick silicone treated liner used for lighting, door, window and cabinet sealing applications.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
A 250.0 mil. urethane tape, series 4310, featuring a A-30 acrylic adhesive on a thick silicone treated liner used for lighting, door, window and cabinet sealing applications.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
A 125.0 mil. urethane tape, series 4310, featuring a A-30 acrylic adhesive on a thick silicone treated liner used for lighting, door, window and cabinet sealing applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
A 250.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
A 125.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | oz/in |
A 250.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 125 Mils |
Adhesion | oz/in |
A 125.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 62 Mils |
Adhesion | oz/in |
A 125.0 mil. vinyl foam tape featuring A-30 acrylic adhesive on a thick silicone liner used for many sealing applications.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 187.5 Mils |
Adhesion | |
P3099.188 is a 187.5 mil, single coated foam tape. It is primarily used for reducing sound transmission and compensates for uneven surfaces and sealing between window frames and waterboard cladding.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | |
Duofoamr S5589 is a double coated foam mounting tape. It is primarily used for automotive emblems and badging, exterior trim and door step plates.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 36.9 Mils |
Adhesion | |
Duofoamr S846VA is a 36.9 mil, double coated foam mounting tape. It is primarily used for mounting and bonding where heat resistance is required.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 254 Mils |
Adhesion | |
Duofoamr S847VA is a 254.0 mil, double coated foam mounting tape. It is primarily used for assembly of wing mirrors and interior components.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 69 Mils |
Adhesion | |
Duofoamr S848VA is a 69.0 mil, double coated foam mounting tape. It is primarily used for assembly of wing mirrors and interior components.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 35.25 Mils |
Adhesion | |
Duofoamr S849VA is a 1/32", double coated foam mounting tape. It is primarily used for a variety of surfaces and provides excellent tack, peel and holding power.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 36.3 Mils |
Adhesion | |
Duofoamr SJ432V is a 1/32", double coated polyethylene foam. It is primarily used for a wide variety of surfaces, including metals and engineered plastics and is heat resistant.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 67.8 Mils |
Adhesion | |
Duofoam r SJ416V is a 1/16", double coated polyethylene foam. It is primarily used for a wide variety of surfaces, metals and engineered plastics.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 129 Mils |
Adhesion | |
Duofoamr SR508V is a 1/8", double coated polyethylene foam. It is primarily used for mounting applications and has good adhesion to a wide variety of surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 66.5 Mils |
Adhesion | |
Duofoamr SR516V is a 1/16", double coated polyethylene foam. It is primarily used for mounting applications to a variety of surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 66.5 Mils |
Adhesion | |
Duofoamr SR516VB is a 1/16" black double coated polyethylene foam. It is primarily used for mounting applications to a wide variety of surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 35.25 Mils |
Adhesion | |
Duofoamr SR532V is a 1/32", double coated polyethylene foam. It is primarily used for mounting applications to a wide variety of surfaces.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 35.25 Mils |
Adhesion | |
Duofoamr SR532VB is a 1/32", double coated polyethylene foam. It is primarily used for mounting applications to a wide variety of surfaces.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | 156 Mils |
Adhesion | |
P3124.156 is a 5/32" medium density, open cell, PVC foam tape with an acrylic pressure sensitive adhesive. It is primarily used for air or dust sealing when abrasion resistance is desired.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 15.62 Mils |
Adhesion | |
Duofoamr is a 1/64" high density polyurethane foam that is double coated with a acrylic adhesive. It is primarily used for exterior automotive trim, badging, scripting and cladding.
Backing/Carrier | PVC - Polyvinylchloride |
---|---|
Adhesive | Acrylic |
Thickness | |
Adhesion | oz/in |
V612-FR consists of closed-cell PVC foam permanently cast on heavy-duty aluminum foil. Vyn-Alum acts as an effective insulator and prevents condensation or moisture build-up on surfaces to which it is applied. V612-FR is a special formulation that meets Building Materials Specification FHC 25/50 flame and smoke spread index (UL 723 Test Method).
Backing/Carrier | PTFE - Extruded |
---|---|
Adhesive | |
Thickness | 55 Mils |
Adhesion | |
950-55 is a laminate of 5 mil PTFE and 50 mil polyethylene foam used as a cap liner for pharmaceutical caps.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 62 Mils |
Adhesion | oz/in |
4241 is a 62 mil (1/16inch), 4# density, white, closed cell, cross linked polyethylene foam coated on both sides with athe same high performance synthetic rubber adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Rubber |
Thickness | 125 Mils |
Adhesion | oz/in |
4441 is 125 mils (1/8 inch), 6# density, white, closed cell, cross linked polyethylene foam coated on both sides rubber adhesive.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 35.8 Mils |
Adhesion | |
Duofoamr SA432V is a 35.8 mil, double coated polyethylene foam used in general bonding and mounting.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | Acrylic |
Thickness | 67.6 Mils |
Adhesion | |
Duofoamr SA416V is a 67.6 mil, double coated polyethylene foam used for general bonding & mounting.
Backing/Carrier | PE - Polyethylene |
---|---|
Adhesive | |
Thickness | |
Adhesion | oz/in |
***DISCONTINUED*** FM 2332 is a 1/32", double coated polyethylene foam. It is primarily used for bonding to a wide range of wood, metal and plastic substrates.
Backing/Carrier | PU - Polyurethane |
---|---|
Adhesive | Acrylic |
Thickness | 250 Mils |
Adhesion | |
***DISCONTINUED*** V798 is a .25" black (med. density) PU foam coated on 1 side with an acrylic adhesive. It is specifically designed for log home gasketing.
Loading results...
No results found for your search
Showing 340 of 340 results
Load More...