Converting Ideas into Solutions

SearchProducts (17 Results)

Search by Application Details




Showing 17 of 17 results

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 15.4 Mils
Adhesion
  Compare Now

An advanced cloth tape that combines a highly conformable backing and an aggressive adhesive for holding down printing plates or carpet.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 5.9 Mils
Adhesion
  Compare Now

60760 is a soft PVC with a clean removal rubber adhesive system with durable PVC backing that provides excellent impact and scuff resistance.

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 11 Mils
Adhesion
  Compare Now

105C is an 11 mil double coated cloth tape used for carpet hold-down especially designed for the convention industry.

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 13 Mils
Adhesion
  Compare Now

100D is a 13 mil. double coated cloth tape used for carpet hold down & mounting. It replaces tack strips.

Backing/Carrier Non-Woven
Adhesive Rubber
Thickness 9.1 Mils
Adhesion
  Compare Now

8709 is a 9.1 mil, double coated non-woven UHA. It is primarily used for bonding automotive trim carpeting. The double coated construction provides consistent lamination and performance on coarse, tufted carpets.

Backing/Carrier
Adhesive Rubber
Thickness 15.5 Mils
Adhesion
  Compare Now

DF545 is a 15.5 mil, double coated cloth tape used for carpet hold-down for convention trade & general purpose maintenance.

Backing/Carrier
Adhesive Rubber
Thickness 12 Mils
Adhesion
  Compare Now

DF642 is a 12.0 mil, general purpose, industrial grade, double-faced cloth tape. It is used as industrial holding, mounting, splicing and installation of carpet.

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 13 Mils
Adhesion
  Compare Now

P55 is a flame retardant, double-coated cloth tape primarily used in industrial applications where flame retardant material is demanded.

Backing/Carrier
Adhesive Rubber
Thickness
Adhesion
  Compare Now

The GS-Series are made up of an unsupported SBR pressure sensitive adhesive in thicknesses of 5 to 50 mils.

Backing/Carrier Polyethylene Coated Cloth
Adhesive Rubber
Thickness 11.8 Mils
Adhesion
  Compare Now

S56 adhesive is zone coated on edges of hand tearable and puncture resistant cloth backing creating a non-adhesive tunnel for wires, cables or cords to lay (pass) under. Removes easily from carpet and other surfaces without leaving a residue. Can be repositioned several times without loss of adhesion.

Backing/Carrier PVC - Polyvinylchloride
Adhesive
Thickness 10 Mils
Adhesion
  Compare Now

P306L is a, 10 mil, heavy-duty, interlined PVC film tape. It is used as a corrosion resistant covering of pipe and conduits or as a moisture barrier on floor panels of commercial aircraft.

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 10 Mils
Adhesion
  Compare Now

This permanent cotton cloth adhesive tape features a cotton cloth substrate coated on both sides with an aggressive synthetic hot melt rubber adhesive in white and offers a gold siliconized paper release liner.

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 12 Mils
Adhesion
  Compare Now

DCCLOTH 3502 is a hand tearable, clean removable 12 mil double coated woven cotton cloth tape coated on both sides with a moderate tack natural rubber adhesive. The white siliconized polyethylene release liner allows for easy removal.

Backing/Carrier Polyethylene Coated Cloth
Adhesive Rubber
Thickness 11.8 Mils
Adhesion
  Compare Now

DUCTCLO 3740 is an 11.8Mil, 70 mesh, high quality polyethylene-coated cloth duct tape with natural rubber/synthetic adhesive. This striped safety warning tape is used for permanent and temporary marking of hazardous areas, aisles, stairs, wires, cords, and more.

Backing/Carrier Polyethylene Coated Cloth
Adhesive Rubber
Thickness 11.8 Mils
Adhesion
  Compare Now

DUCTCLO 3880 is an 11.8mil low gloss mesh cloth tape with a natural rubber adhesive. The center length on the adhesive side of the tape has a plastic coating which creates an adhesive-free zone, or channel, for cables so they do not become gummy with adhesive residue.

Backing/Carrier Non-Woven
Adhesive Rubber
Thickness 11 Mils
Adhesion
  Compare Now

DCPETCLO 3575 is an 11mil (0.275mm) cotton/polyester blend cloth coated on both sides with a high shear, moderate tack natural rubber-based adhesive system. Clean removable with no residue.

Backing/Carrier Uncoated Cloth
Adhesive Rubber
Thickness 12 Mils
Adhesion
  Compare Now

DCCLOTH 3502 is a hand tearable, clean removable 12 mil double coated woven cotton cloth tape coated on both sides with a moderate tack natural rubber adhesive. The white siliconized polyethylene release liner allows for easy removal.

Loading results...

No results found for your search

Showing 17 of 17 results

Load More...
; ;