Saint-Gobain
V2830
Double Coated, Closed Cell Polyurethane Foam
V2830 is a .03" thick, closed cell polyurethane, that is double coated with an acrylic adhesive. This is a multipurpose foam that's primarily used for dissipation of vibrations and to distribute stresses and forces over the entire bond line. The adhesive on the liner side has been specifically formulated to provide an ultra high bond especially in severe exterior applications. Normount® V2800 series.
| Backing/Carrier | PU - Polyurethane |
|---|---|
| Adhesive | Acrylic |
| Thickness | 30 Mils |
| Tensile | 130.00 lbs/in |
|---|---|
| Elongation | 260.00% |
| Adhesion (liner) | 100 oz/in |
| Adhesion (unwind) | 100 oz/in |
| Min. Application Temp | 60° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Available as V2830H which uses a high density 5 mil light blue polyethylene liner. Siliconized both sides for easy release
- Available as V2830L which has a low density 5 mil light blue polyethylene liner particularly suited where end product must be coiled or rolled up
- v2800 series uses a standard medium 5 mil light blue polyethylene liner
- Polyethylene liner excels in automated production
- Excellent aging properties and all-weather environmental resistance
- Dynamic Shear Adhesion= 120PSI
- Density=34 lbs/cu ft
- Tensile Strength of Foam=140PSI
- Available with an easier release liner as V2830H
- UV light resistant
- Extreme temperature resistant
- Fungi, oxidation & ozone resistant
- Stress distribution reduces pressure points, thereby minimizing distortion
- Reduces/eliminates use of liquid adhesives, screws, rivets, welds and subsequent surface refinishing
- Conformable polyurethane foam promotes maximum surface contact
- Excellent quick-stick speeds
Adhesive Tape Applications
- Prevents corrosion of two dissimilar materials
- Aids in relieving forces caused by thermal expansion and contraction between bonded parts
- Mounting emblems and ornamentation
Adhesive Tape Colors
- Black
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.