Permacel/Nitto Denko America
P245HDF
PET Film/PET Non-Woven Electrical Insulating Tape
P245HDF is a 7 mil, PETfilm/PET non-woven electrical insulating tape that is the flame retardant version of the P245HD. This tape is used for the widest range of electrical insulating applications. This produat is ideally suited for applications that require a high temperature rating. Recommended for use in manufacturing bobbin, stick and form wound coils for ground and barrier insulation, holding winding starts and finishes, coil end insulation, coil banding, terminal board pads, out protecitive wraps, lead cross-over insulation, insulating connections and anchoring terminal boards and leads. Also used as a margin tape. Ideal with sub-fractional and fractional horsepower motor windings-for bandinng field coils, bundling end turns, insulating connections and winding separator/phase insulation.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 7 Mils |
| Tensile | 40.00 lbs/in |
|---|---|
| Elongation | 70.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Flammability Rating: passes UL 510 Test
- UL componenet recog: Guide OANZ2, File E20392
- Highly versatile...part of the most popular line of electrical insulating tapes
- Tear and puncture resistance permits its use over burrs and sharp edges
- High tensile strength, with elongation
- Excellent dielectric strength and non-corrosive
- Outstanding adhesion, with flame retardancy
- Thinkness allows for less wraps as margin tape
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.