Novagard / Foam Seal
Alumaseal
Foam Seal
Foam Seal Aluma-Seal is an industrial medium density PVC foam product cast on an aluminum liner. AlumaSeal is a PVC foam with an aluminum covering on one side and acrylic adhesive on the other side. It is often used in the appliance and HVAC industries to shield cool compartments from heat sources to prevent condensation and reduce noise in refrigeration products. It is available in a few foam thicknesses from 1/16 to 1/4".
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 12 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -4° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 172° F |
Product Features
- PVC covered with aluminum one side & acrylic adhesive on the opposite side
- Conforms well to irregular surfaces
- Provides protective aluminum barrier
- Prevents condensation build-up
- Can be die cut to specifications
Markets Served
- Industrial
- Appliance
Adhesive Tape Applications
- Foam Seal Aluma-Seal is used as an insulator and prevents condensation build-up on surfaces to which it is applied.
- Aluma-Seal reduces vibration and deadens sound in HVAC applications.
Adhesive Tape Colors
- Gray
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.