T-Tak™ Heavy Duty

T-Tak ™ is a 3.7 mil double coated tissue with synthetic rubber adhesive. It has exceptional holding strength and an aggressive adhesive system. It has a 42# coated kraft paper with finger-lift edge. It provides superior performance on heavier weight papers and light board stocks . T-Tak ™ works well on curved and uneven surfaces. It is perfect for mounting name plates, heavy posters, signs, promotional displays and inventory tags. It is good for permanently sealing poly bags, board envelopes, & cartons.

Backing/Carrier Tissue
Adhesive Rubber
Thickness 3.7 Mils
Adhesion (liner) 84.66 oz/in
Adhesion (unwind) 84.66 oz/in
Min. Application Temp 40° F
Min. Service Temp 0° F
Max Short-Term Temp 140° F
Max Long-Term Temp

Product Features

  • Exceptional holding strength
  • Aggressive adhesive system
  • Finger-lift edge

Markets Served

  • Arts & Entertainment
  • Commercial printing
  • Paper products
  • Plastic bag manufacturing
  • Signage, Banners, & Printing

Adhesive Tape Applications

  • Mounting name plates
  • Mounting heavy posters and signs
  • Promotional displays
  • Inventory tags
  • Permanently sealing poly bags
  • Sealing board envelopes and cartons

Converting Services

Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management

At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.