3M
5959
Outdoor Masking & Stucco Tape
3MT Outdoor Masking and Stucco Tape 5959 is designed for construction, marine and maintenance applications. It is a robust tape made with polyethylene film over a dense cloth scrim and a blend of natural and synthetic rubber adhesive. With its 90 day UV resistant waterproof backing and high shear resistant adhesive, it is an excellent choice for outdoor holding and masking applications. The unique adhesive removes cleanly from most opaque surfaces up to 90 days after application. The strong backing makes it ideal for pulling through spatter from stucco and EIFS applications.
| Backing/Carrier | Polyethylene Coated Cloth |
|---|---|
| Adhesive | Rubber |
| Thickness | 12 Mils |
| Tensile | 35.00 lbs/in |
|---|---|
| Elongation | 21.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 53 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Flame Spread Index - 5 E-84 Smoke Developed Index - 0
- Meets UL 723, HUD, and BOCA codes
- High shear resistant adhesive
- 90 day UV resistant waterproof backing
- Adhesive removes cleanly
- Roll sides are not tacky so the roll stays cleaner on the job site
- Abrasion resistant backing keeps surface from being marred
- The tough polyethylene outer layer and strong scrim backing make one piece removal of the tape possible when pulling through heavy or extra strong coating
Adhesive Tape Applications
- Construction, marine and maintenance applications
- An excellent choice for outdoor holding and masking applications
- Ideal for overspray protection when masking substrates from coatings such as stucco, EIFS, gel coat, and construction coatings
- Effective in marine applications where temporary tents are made to contain coating that is being removed or to protect coating being applied from dust and debris
- Can be used on surfaces such as window and door frames to protect them from damage during construction
- Ideal for critical abatement applications where the surface must not be damaged or marred during the removal process
- Thick adhesive layer holds well to irregular surfaces such as sealed masonry or brick
- Excellent for temporary repairs and holding on the job
Adhesive Tape Colors
- Red
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.