Converting Ideas into Solutions ®

SearchProducts (12 Results)

Search by Application Details




Showing 12 of 12 results

Backing/Carrier Polyimide
Adhesive Silicone
Thickness 2.5 Mils
Adhesion
  Compare Now

2345-1 is a 2.5 mil, polyimide film coated with a high-temperature, pressure sensitive silicone adhesive. It is primarily used in electrical insulation and gold finger protection.

Backing/Carrier Fiberglass
Adhesive Silicone
Thickness 6.7 Mils
Adhesion
  Compare Now

2915-7 is a 6.7 mil, high-temperature glass cloth tape with a durable woven fiberglass backing.

Backing/Carrier PET - Polyester
Adhesive Silicone
Thickness 2.5 Mils
Adhesion
  Compare Now

9148 is a 1 mil. blue polyester film tape coated one side with 1.5 mils. of silicone adhesive (2.5 mil total thickness). It is designed to perform in masking applications requiring high chemical resistance. 9148 is also excellent for splicing applications requiring a high performance silicone adhesive. It resists fumes and chemicals for low / no residue applications. It will not break or tear during application or removal.

Backing/Carrier Aluminum/Cloth
Adhesive Rubber
Thickness 15 Mils
Adhesion
  Compare Now

P12L is a woven cloth laminated with a dead soft aluminum foil and presented on a release liner. This tape is used for sound & vibration damping, sheet metal repair and aircraft stripping mask.

Backing/Carrier PET - Polyester
Adhesive Silicone
Thickness 2.5 Mils
Adhesion
  Compare Now

9110 is a 1 mil. violet polyester film tape coated one side with 1.5 mils. of silicone adhesive (2.5 mil total thickness). It is used in masking applications requiring high chemical resistance. Also excellent for splicing applications requiring silicone adhesive.

Backing/Carrier PE - Polyethylene
Adhesive Acrylic
Thickness 5.5 Mils
Adhesion
  Compare Now

PEFILM 4520 is a 5.5mil low density polyethylene film tape with an acrylic adhesive. The acrylic based adhesive systam provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 7 Mils
Adhesion
  Compare Now

PEFILM 4540 is a 7 mil low density polyethylene film coated with a synthetic rubber adhesive. Its tough polyethylene backing offers good abrasion and tear resistance.

Backing/Carrier PE - Polyethylene
Adhesive Rubber
Thickness 9 Mils
Adhesion
  Compare Now

PEFILM 4570 is a 9 mil low density polyethylene film tape coated on one side with a synthetic rubber adhesive that remains permanently tacky and bonds well to most surfaces over a wide range of temperatures.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 5.2 Mils
Adhesion
  Compare Now

PVC 4700 is a 5.2mil matte surface soft PVC coated in a synthetic rubber adhesive. This superior quality product has a long shelf life and write-on capabilities. It provides a very effective vapor and moisture barrier.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 6 Mils
Adhesion
  Compare Now

PVC 4725 is a 6 mil soft PVC tape with a synthetic rubber adhesive. It is used for color coding; lane marking and safety coding, decorative striping, masking for hard chrome plating & anodizing, harness and pipe wrapping, and duct and joint sealing.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 8 Mils
Adhesion
  Compare Now

ELE&WH 4140 is a 8 Mil (0.20 mm) PVC premium grade electrical insulation tape with a rubber-based adhesive. It offers all-weather performance.

Backing/Carrier PVC - Polyvinylchloride
Adhesive Rubber
Thickness 7 Mils
Adhesion
  Compare Now

ELE&WH 4100 is a 7 mil (0.178mm) PVC electrical insulation tape with a natural rubber adhesive. ELE&WH 4100 is used for wire and cable insulation, bundling, and primary splice insulation at no more than 600V. It is non-flame retardant.

Loading results...

No results found for your search

Showing 12 of 12 results

Load More...
; ;