3884, Flame Retardant Adhesive Transfer Film, Venture Tape Corp., adhesive tape datasheet

Home >

Venture Tape Corp. 3884
Flame Retardant Adhesive Transfer Film

General Information

3884 is a 4 mil premium performance unsupported acrylic transfer adhesive film, with built-in flame retardant properties. This high performance acrylic system exhibits excellent adhesion to a wide variety of materials. Has excellent oxidation and U.V. resistance for both interior and exterior application. Heavier thickness will provide for improved conformability on irregular, rough or mismatched surfaces.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
	Acrylic	4.00 mil	55# Glassine

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
75.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	-50 °F	400 °F

Adhesive Tape Features

Built-in flame retardant properties
Excellent adhesion to a wide variety of materials
Excellent oxidation and U.V. resistance for both interior and exterior application
Meets Federal Aviation Administration Test requirements: FAR 25.853(b) and Appendix F and Amendent 25-51 (3/6/80)
Heavier thickness will provide for improved conformability on irregular, rough or mismatched surfaces.

Adhesive Tape Applications

Primarily used for mounting interior aircraft wall covering panels made of Tedlar, Vinyl, Polyester, Fiberglass reinforced plastics, etc. where excellent flame retardant properties and high holds and heat resistance are required
Used for high performance laminating and mounting of nameplates, decals and other decorative trim and high performance foams.

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Venture Tape Corp. 3884

Flame Retardant Adhesive Transfer Film

Backing	Adhesive	Thickness	Adhesion
N/A	Acrylic	4.00mil	75.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.