52325 PV3, Double Coated Flexographic Mounting Tape, tesa tape inc, adhesive tape datasheet

Home >

tesa tape inc 52325 PV3
Double Coated Flexographic Mounting Tape

General Information

52325 PV3 is a 4.6 mil, double coated, UPVC that is used to mount photopolymer flexographic plates for printing. High adhesive value & good shear resistance ensures no plate movement or edge lift problems, even at high speeds and on extended print runs. Improved unwind characteristics of the structured PP liner ensure that easy handling and mounting is guaranteed. It also prevents the formation of air bubbles. Plates are easily repositioned during mounting as the full adhesion of the tape only becomes effective during the print run.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
UPVC - Unplasticized Polyvinylchloride	Rubber	10.00 mil	Polypropylene (structured, white)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
65.00 oz/in	65.00 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp

Adhesive Tape Features

High adhesive value
Good shear resistance
No plate movement or edge lift problems, even at high speeds and on extended print runs
Improved unwind characteristics of the structured PP liner ensure that easy handling and mounting is guaranteed
PP liner prevents the formation of air bubbles
Plates are easily repositioned during mounting as the full adhesion of the tape only becomes effective during the print run

Adhesive Tape Applications

Mounting of photopolymer plates in flexographic printing

Adhesive Tape Markets Served

Adhesive Tape Colors

Pink

Comparable products

tesa tape inc 52325 PV3

Double Coated Flexographic Mounting Tape

Backing	Adhesive	Thickness	Adhesion
UPVC - Unplasticized Polyvinylchloride	Rubber	10.00mil	65.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.