S849VA, Double Coated Foam Mounting Tape, Scapa Tapes North America, adhesive tape datasheet

Home >

Scapa Tapes North America S849VA
Double Coated Foam Mounting Tape

General Information

Duofoam® S849VA is a 1/32", double coated foam mounting tape. It is primarily used for a variety of surfaces and provides excellent tack, peel and holding power. The product is ideal for mounting applications.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PE - Polyethylene	Rubber	35.25 mil	Paper (3.5 mil, 60# Kraft)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
150.00 oz/in	150.00 oz/in	220.00 lbs/in	520.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
65 °F	0 °F	160 °F

Adhesive Tape Features

Rubber based adhesive has good specific adhesion to a wide variety of surfaces
High adhesive coat weight aids in adhesion to irregular surfaces
Good quick stick makes application easy
High shear strength gives high load bearing ability
Foam gives good thermal insulation properties
Composite die cuts easily
Holding Power: (PSTC Method#7 Mod./178°) 4.4 psi (1/2"x1"x1000g) @ RT > 1440 min.
Foam thickness = 1/32"
Foam test data (excluding adhesive): foam density (lbs./cubic foot) = 6

Adhesive Tape Applications

Assembly of wing mirrors and interior components
Interior trim
NVH

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Scapa Tapes North America S849VA

Double Coated Foam Mounting Tape

Backing	Adhesive	Thickness	Adhesion
PE - Polyethylene	Rubber	35.25mil	150.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.