Call 800-282-0090


Home > Data Sheet
Scapa Tapes North America S5589
Double Coated Foam Mounting Tape

General Information
Duofoam® S5589 is a double coated foam mounting tape. It is primarily used for automotive emblems and badging, exterior trim and door step plates.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PE - Polyethylene Acrylic    

Adhesion to Steel
180° Peel
adhesion to steel 180° peel - liner side Tensile Strength Elongation Percent
69.50 oz/in 69.50 oz/in    

Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
65 °F -40 °F 250 °F  
Adhesive Tape Features
  • Acrylic adhesive forms a consistent lasting bond
  • Good resistance to dilute acids/alkalies
  • Very good UV resistance
  • Quick and easy to apply
  • Provides a clean edge finish
  • Compression to effect seal: 20%
  • Tensile strength > 200 N/cm2
  • Elongation >300%
  • Density = 13 lbs./sq.in.
Adhesive Tape Applications
  • Automotive emblems and badging
  • Exterior trim
  • Door step plates
Adhesive Tape Markets Served
Adhesive Tape Colors
  • Black

Comparable products
Backing Adhesive Thickness Adhesion
 PE - Polyethylene   Acrylic   mil   69.50oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options
Converting Services
Budnick Converting offers a number of services to take the product you need and make it perfect for your application.  With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up. 
Services
Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.