S4927, Dublfilm® Fire Retardant Double Coated Tape, Scapa Tapes North America, adhesive tape datasheet

Home >

Scapa Tapes North America S4927
Dublfilm® Fire Retardant Double Coated Tape

General Information

Dublfilm® S4927 is a 6.7 mil, double-coated, fire retardant woven cloth tape. It has a white rubber-based, pressure sensitive adhesive on the unwind side and on the linered side is a black rubber, pressure sensitive adhesive. It is primarily used on installation of carpeting in airplanes and fastening floor covering products. It meets the requirements of Boeing BMS.5 133B-Type IV Class 1 specification.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Uncoated Cloth	Rubber	6.70 mil	Glassine (Yellow)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
24.70 oz/in	57.10 oz/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
65 °F	0 °F	140 °F

Adhesive Tape Features

Fire retardant
Very light and conformable
Easy to apply
Black adhesive on liner side/White adhesive on unwind side
Nominal Weight (exluding liner): 5 oz/sq. yd.
Flammability: B SS 7230 Method F2, 12 seconds - vertical test: Time to extinguish < 15 sec.; Burn length = 3.5 in.; Drip extinguish time < 5 sec.

Adhesive Tape Applications

Installation of carpeting in airplanes
Fastening of a wide range of floor covering products.

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

Scapa Tapes North America S4927

Dublfilm® Fire Retardant Double Coated Tape

Backing	Adhesive	Thickness	Adhesion
Uncoated Cloth	Rubber	6.70mil	24.70oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.