S313-76, Dublfilm® Double Coated Polyester Tape, Scapa Tapes North America, adhesive tape datasheet

Home >

Scapa Tapes North America S313-76
Dublfilm® Double Coated Polyester Tape

General Information

Dublfilm® S313-76 is a 3.2 mil, double coated, polyester tape designed for photo mounting applications. A 76# polyethylene coated stay flat liner is used to aid in photo laminating. The acrylic adhesive system in Dublfilm® S313-76 provides an excellent balance of peel, tack and holding power, and will not fade photographs.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PET - Polyester	Acrylic	3.20 mil	Paper (5.5mil, 76# stayflat)

Adhesion to Steel 180° Peel	adhesion to steel 180° peel - liner side	Tensile Strength	Elongation Percent
115.00 oz/in	115.00 oz/in		100.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
65 °F	-40 °F	250 °F

Adhesive Tape Features

Polyester film adds dimensional stability and strength
Extra heavy 76# liner adds stay flat and moisture resistant properties, and will not wrinkle
Adhesive film is easy to handle and laminates well to a variety of substrates
Performs well to a variety of substrates
Special adhesive system will not discolor photographs
Initial peel adhesion to SS (PSTC 1 mod.): 20 min @ RT = 46 oz/in
Initial peel adhesion to ABS(PSTC 1 mod.): 20 min @ RT=54
Holding Power (PSTC 7 mod.): 2.2 psi @ RT >100 hours
Heat resistance (PSTC 7 mod.): 1.1 psi @ 158° > 67 hours
Humidity resistance: peel retention after one week @ 100°/100% R.H. = 92%
Water resistance: peel retention after 24 hour soak = 97%

Adhesive Tape Applications

Photo mounting

Adhesive Tape Markets Served

Adhesive Tape Colors

Clear

Comparable products

Scapa Tapes North America S313-76

Dublfilm® Double Coated Polyester Tape

Backing	Adhesive	Thickness	Adhesion
PET - Polyester	Acrylic	3.20mil	115.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.